Zanussi ZDI 6895 QX Instruction Book page 13

9. To cancel a programme in progress
Press the "START" push button for 5 seconds to cancel
the setting or the running of the current programme. An
intermittent audible signal will be heard and all the
indicator lights will turn off while in the digital display 3
horizontal lines will appear.
After 5 seconds the dishwasher will return to setting
mode.
It is now possible to select a new washing programme.
10. At the end of the washing
programme
The dishwasher will automatically stop and an
intermittent audible signal will be heard when the
programme has ended.
3 flashing horizontal lines will appear in the digital
display and all the indicator lights (drying phase
included) will turn off.
You cannot select a new programme if the previous
programme has not been completed or cancelled.
Press the On/Off push button and open the door and
wait a few minutes before removing the dishes; in this
way they will be cooler and the drying will be improved.
Empty the lower basket first and then the upper one; this
will avoid water dripping from the upper basket onto the
dishes in the lower one.
Important!
In general it is not advisable to open the door while the
machine is working; if the door is opened however, a
safety device ensures that the machine stops.
Care must be taken if the door is opened during the hot
phase or immediately after a programme has finished, as
steam may escape.
When the washing programme has finished, it is
recommended that the dishwasher is unplugged and the
water tap turned off.
13