Minimum Required Connections; Figure 2.4.7: Minimum Required Connections - Intelligent Motion Systems MFM Motion Detector Operating Instructions Manual

Minimum Required Connections

The connections shown are the minimum required to operate the Microstepping MForce PowerDrive. These are
illustrated in both Sinking and Sourcing Configurations. Please reference the Pin Configuration diagram and
Specification Tables for the Microstepping MForce PowerDrive connector option you are using.
Opto Reference*
* The Opto Reference Will
set the Sink/Source
Configuration of the Inputs
Sinking: OptoRef = +5 to +24 VDC
Sourcing: OptoRef = Ground
Step
Direction
Part 2: Interfacing and Configuring
3
4 6
P1
MForce PowerDrive Front
12-Pin Wire Crimp at P1 Shown.
See Specifications for Pin
Numbering for other versions.

Figure 2.4.7: Minimum Required Connections

Power Ground
+V (+12 to +48)
P3
2
1
ØA
ØA
1 2
ØB
3 4
ØB
P4
Stepping Motor
25