Changing/Installing Batteries - extronics iCAM501U Operating Manual

2.2 Changing/Installing Batteries

Warning! For iCAM501U refer to notes in section 1.3.1, and refer to Table 1 for
permitted cells.
Warning! For iCAM502 refer to notes in section 1.3.2, and refer to Table 2 for
permitted cells.
To change or install the batteries in the iCAM50x, turn the screw as indicated below to
remove the cover:
Install the batteries in the correct orientation (indicated on the enclosure) and close the lid
again:
USB Port
Operating Manual
Battery
Compartment
11