Ready For Installation - Westlake DPH500-GSM User Manual

DPH500 Fixed Wireless Phone User Manual V1.0
Receiver Sensitivity
Ambient Noise
Environment Temperature
Humidity
Air Pressure

5 Ready for Installation

 Install SIM card well (Don't install it when power on).
 Power on: Insert one end of adapter into power jack, the
other into the phone jack.
 To void that the power failure stop your normal conversation,
you are recommended to install private battery.
 Battery installation: Open the battery cover, first plug the
Li-ion battery into the battery connector inside the battery
compartment, and then
compartment. Fix the battery by foam-rubber cushion. Finally,
close the cover.
 New batteries are not fully charged. Your phone might take
several seconds to start charging the battery, and might
require several hours to charge fully. The display shows
Charge Complete when finished.
 Antenna setting method: Twist the antenna perpendicularly
up to the screw pillar in the right side of the base unit tightly.
Before use, make sure the power of phone being on and SIM card
＜-104dBm
≤ 60dB(A)
-10℃~ +50℃
10%~95%
86~106KPa
pace it inside the battery