Connect And Set Up; Connect; Set Up Speakers; Set Up Easylink (Hdmi-Cec Control) - Philips HTD5510 User Manual

3 Connect and set
up
Note
•
For identification and supply ratings, see the type plate
at the back or bottom of the product.
•
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.

Connect

Complete the necessary connections of
your home theater (such as speaker and TV
connections).
For information about the connections, see the
quick start guide or download the complete
user manual from www.philips.com/support.

Set up speakers

Set up the speakers manually to experience
customized surround sound.
Before you start
Make the necessary connections described in
the quick start guide, and then switch the TV to
the correct source for your home theater.
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Audio] > [Speaker Setup].
4
Press the Navigation buttons and OK to
select and change:
[Speakers Volume]: Set the volume
•
level of each speaker.
[Speakers Delay]: Set the delay time
•
for speakers which are placed closer to
the seating position in order to obtain
equal audio transmission from all the
speakers.
Set up EasyLink (HDMI-CEC
control)
This home theater supports Philips EasyLink,
which uses the HDMI-CEC (Consumer
Electronics Control) protocol. EasyLink-
compliant devices that are connected through
HDMI can be controlled by a single remote
control.
Note
•
Depending on the manufacturer, HDMI-CEC is known
by many names. For information on your device, see
the user manual of the device.
•
Philips does not guarantee 100% interoperability with
all HDMI-CEC devices.
Before you start
• Connect your home theater to the HDMI-
CEC compliant device through HDMI
connection.
• Make the necessary connections described
in the quick start guide, and then switch
the TV to the correct source for your
home theater.
Enable EasyLink
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Video], and then press OK.
4
Select [HDMI Setup] > [EasyLink Setup]
> [EasyLink] > [On].
5
On your TV and other connected devices,
turn on HDMI-CEC control. For details, see
the user manual of the TV or other devices.
• On your TV, set the audio output to
'Amplifier' (instead of TV speakers).
For details, see the TV user manual.
EN 7