Advertisement
WT-368 CDMA Phone
Malfunction
1. Can not make the call
2. No sound when the call comes
3. EAA4 display on LCD
4. EAA5 display on LCD
5. EAA6 display on LCD
6. Only "0" on LCD
7. LCD is flickering
8. Intermit when you make the call
WRITE A NUMBER FOR YOUR WIRELESS PHONE
WT-368 – USER MANUAL – Rev.1 – Technical Support:
A. The antenna disengage;
B. No signal or the signal is too weak
C. Your Phone is out of charge
A. The loudspeaker was damaged.
B. The handle placed in a wrong potion
The SIM card was locked, input the PIN code or
change another SIM card
A. The SIM Card is installed incorrectly.
B. The SIM Card was damaged.
Net was locked. Press 6 ＃ to undo the lock.
Charge the Phone
No enough electricity. Charge the Phone
A. No enough electricity. Charge the Phone
B. No signal or the signal is too weak
COPYRIGHT ©2008 WITURA CORPORATION SDN BHD
Reasons
technical@witura.com
7
Advertisement
