Location Of Controls - Pro Audio MC 9010 iP User Manual

SNOOZE
BUTTON
(ST/MO), PLAY/ PAUSE BUTTON
BUTTON
BAND/STOP BUTTON
PLAY MODE
/CLOCK
iPod
FOLDER /PRE-
FOLDER +/PRE+
H
ALARM2
CARD
ALARM1 BUTTON
INTERFACE
AC CORD
CAUTION
Usage of controls, adjustments, performance or procedures other than those specified herein may result
in hazardous radiation exposure. This unit should not be adjusted or repaired by anyone except a qualified
service person.
IMPORTANT
Since movement of the CD mechanism and the sensitive circuitry may cause interference to the radio
tuner nearby, switch this unit off while operating other radio devices.
PRECAUTIONS FOR USE
INSTALLATION
Unpack all parts and remove protective material. Do not connect the unit to the power outlet before
checking the voltage and before all other connections have been made. Do not cover any vents and
make sure that there is a space of several inches/centimeters around the unit for ventilation.
CONNECTION
1. Connect the power cord to AC outlet.
2. When you first plug the unit into the power outlet, the unit will go into standby mode.
3. Turn on the power and select CD function. If the LCD display is on with backlighting, it means the
power supply is normal and your system is ready to play music.

LOCATION OF CONTROLS

4