International; Proscribed Materials - Intel ATX 0.9 Design Manual

8.2 International

The vendor must provide a complete CB certificate and test report to IEC 950, 2
A1, A2, A3, and A4. The CB report must include ALL CB member country national
deviations. CB report must include evaluation to EN60 950, + A1, A2, A3, A4 and
EMKO-TSE (74-SEC) 207/94.
All evaluations and certifications must be for reinforced insulation between primary and
secondary circuits.
It is highly recommended that the CB report be issued by NEMKO.

8.3 Proscribed Materials

Cadmium should not be used in painting or plating.
No quaternary salt electrolytic capacitors shall be used.
Intel ATX Power Supply Design Guide
nd
Version 0.9
edition +
Page
31