Mechanical Requirements; Labeling / Marking; Physical Dimensions - Intel ATX 0.9 Design Manual

Intel ATX Power Supply Design Guide
Version 0.9

4. Mechanical Requirements

4.1 Labeling / Marking

Each supply shall be marked with the following, at minimum:
Access warning text ("Do not remove this cover. Trained service personnel only. No
user serviceable components inside.") in English, German, Spanish, French, Chinese,
and Japanese with universal warning markings.
Manufacturer information: manufacturer's name, part number, and lot date code in
human-readable text format, etc.
Nominal AC input operating voltages (100-127 VAC and 200-240 VAC) and current
rating certified by all agencies specified in Section 8.
DC output voltages and current ratings.

4.2 Physical Dimensions

The supply shall be enclosed and meet the physical outline shown in either Figure 2 or 3, as
applicable.
Page 20