Advertisement
Driver installation
Driver Installation (Linux Kernel 2.4.0+)
1. Plug in the device
2. Please check whether it had been enumerated in file /proc/scsi/scsi. If not please
check whether modules had been loaded, i.e : usb-storage, scsi_mod, sd_mod, ...,
by using "/sbin/lsmod". If not become root or use sudo with "modprobe usb-storage".
3. If the device is enumerated in /proc/scsi/scsi, then it is OK to mount the Pen
plus
Drive
2.0 to existed desired directory with "mount/dev/sda1 <desired directory>". If
there is no partition existed, please omit the digit. "a" means first LUN (Logical Unit),
then "b", "c", ... and the digit means the partition number. If fail, please send us the
output of 'dmesg' and make sure those messages are collected after the USB
FlashDrive 2.0 is plugged in.
4. You may use "Control Center" from Gnome -> Mount Points (left side) -> Hard
Drive and select the appropriate device and partition, specify the mount point
(existed directory) and others, i.e. uid, gid, permission, ..., of course you need root
privilege. Suggest you un-mount it to avoid error messages on the next booting.
5. To eject, use "eject <desired directory>" to flush the buffer and clear the mount
information.
6. After mounting the USB FlashDrive 2.0, you may do any file operations on it.
7. Some latest distributions may automatically mount the USB device on the
desktop.
8. If there is any problem, please attach the "dmesg" output and/or
/var/log/messages.
Drive disconnection
Windows 98 / 98SE
Wait till the LED light dimmed, then remove directly from USB port.
Windows ME / 2000 / XP
Double-click (Unplug or Eject Hardware)
of your screen. A window will appear, select the name of the device that you want to
remove, and then click the "Stop" button.
Confirm the device that you want to remove by clicking "OK", wait till the LED light
dimmed, then remove from USB port.
Mac OS 9.x or above
Drag the device icon to the Trash Can, confirm remove, wait till LED light dimmed,
then remove from USB port.
Linux Kernel 2.4.0 or above
To remove, use "eject <desired directory>" command to flush the buffer and clear the
mount information.
Warranty
Product is covered by a 1 year warranty. If this product is found to be defective, it will
be replaced with no cost for you. You may return it with original cash register receipt
to the place of purchase. This warranty does not reply to normal wear or to damage
resulting for abnormal use, misuse, abuse or neglect or accident Digitex will not be
liable for any incidental, consequential or special damages, however caused, for
breach of warranty or otherwise. It is recommended that you keep a minimum of two
copies of important data and that the USB drive does not hold the only copy of any of
your documents.
in the system tray in the lower right part
Advertisement
