Advertisement
Introduction
Features:
Support USB 2.0 specification
No external power is required. Connected through the USB socket
Additional security password functions
Data retention for at least 10 years
Hot Plug & Play - Enable you to install anytime.
Precautions
Wait until the LED is flashing in a normal frequency before deinstalling the USB
Flash Drive otherwise data will be lost and device can be damaged. The device must
be deactivated (using the windows eject option) before deinstalling otherwise data
could be lost.
Only qualified personnel may open and repair the device.
Check the USB ports of the PC you want to use for damage and seal the USB
port of the device with the protective cap when the device is not in use.
Avoid overheating, direct exposure to the sun and high and extremely low
temperatures may cause damage to the device.
Protect the device against humidity and condensation.
Avoid strong electromagnetic influence that may cause data loss.
Driver installation
Driver Installation (Win 98 / 98 SE)
1. Double check that you have installed USB 2.0 support driver from your
motherboard driver CD disc
2. Insert the driver CD disc into your CD-ROM
3. A menu will automatically pop up
4. Select Install / Remove Driver to start installation
5. Follow the on screen instruction to install driver
6. Restart machine after installation is completed
7. Insert your device
Caution: Please install driver first before plugging in your device!!!
Driver Installation (Win ME / 2000 SP3 / XP)
For these operating systems, no driver is required; simply plug in your device into
your USB port on your computer, and the operating system will automatically
recognized the device with its built-in driver (USB Mass Storage Class Driver).
Driver Installation (Mac OS 9.x+)
No driver is required for Mac OS users. However, since the Mac is not USB 2.0
compliant, the drive will only have the performance of USB 1.1.
Advertisement
