Maintenance; Depth Rod - DeWalt DW505 Instruction Manual

Depth Rod

To adjust the depth rod, loosen the handle and move rod so that the
distance between the end of the rod and the end of the bit equals the
desired drilling depth. When drilling with depth rod, stop when end of
rod reaches surface of material.

Maintenance

CLEANING & LUBRICATION
Use only mild soap and damp cloth to clean the tool. Never let any liquid
get inside the tool; never immerse any part of the tool into a liquid.
Self-lubricating bearings are used in the tool and periodic relubrication
is not required. In the unlikely event that service is ever needed, take
your tool to an authorized service location.
Accessories
Recommended accessories for use with your tool are available at extra
cost from your distributor or local service center.
CAUTION: The use of any non-recommended accessory may be
hazardous.
MAXIMUM RECOMMENDED CAPACITIES
DW505
CHUCK CAPACITY 1/2"
R.P.M. 0–1,100
0–2,700
BITS, METAL DRILLING 3/8" – Low speed
WOOD, FLAT BORING 1-1/2" – Low speed
BITS, MASONRY DRILLING 3/4" Soft materials
HOLE SAWS 2-1/8" – Low speed
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
6