Table of Contents
Advertisement
Important!
You must first connect both of your communicating devices to the same Wi-Fi
network and be using an active/registered Samsung account prior to using this
application.
Note: To view more information about DLNA certified products visit dlna.org/home.
1. Connect to a Wi-Fi network.
2. Press
and tap
3. Sign in using your existing Samsung account, or follow the prompts to create a new
Samsung account.
4. If prompted, read the onscreen message about network charges and tap Yes to continue
and return to the main AllShare Play screen.
Note: If the main screen still shows a Sign in box, close the application and restart it.
5. Tap Start and follow the onscreen prompts.
The application contains two separate streaming media options:
●
Registered storage: Receive and playback media stored externally (server, laptop, etc.)
directly on your device by allowing you to add a Web storage service for streaming
content.
●
Registered devices: Stream/share selected multimedia content from your device to
DLNA-compliant devices connected to the same Wireless Access Point.
Configuring AllShare Play Settings
The AllShare Play™ application must first be configured prior to its initial use. You must set up
parameters such as connected Wi-Fi, Items to share, source server address, and external
device acceptance rights.
1. Press
and tap
2. Press
> Settings to configure the following settings:
Registered storage: Add a Web storage locations. Without a storage
service/location added, you will not be able to use AllShare Play.
Registered devices: Indicate the source of the streaming images and videos. The
default is your phone. Use the main screen to add more external devices.
Setting up web services: Set up external Web services by signing in to external
sites such as Facebook, YouTube, etc.
Apps and Entertainment
>
AllShare Play.
>
AllShare Play.
77
Advertisement
Table of Contents
