Intel ® 865P Chipset; Universal 0.8 V / 1.5 V Agp 3.0 Connector; Example Of Single Channel Configuration Without Dynamic Mode - Intel D865PCD Technical Product Specification

Intel Desktop Board D865PCD Technical Product Specification
Channel A DIMM
Throughput
Level Configuration
Highest Dual Channel with Dynamic Mode
Single Channel with Dynamic Mode
Single Channel without Dynamic Mode
Lowest
Figure 6. Example of Single Channel Configuration without Dynamic Mode
1.6 Intel ® 865P Chipset
The Intel 865P chipset consists of the following devices:
•
Intel 82865P Memory Controller Hub (MCH) with Accelerated Hub Architecture (AHA) bus
•
Intel 82801EB I/O Controller Hub (ICH5) with AHA bus
•
Firmware Hub (FWH)
The MCH is a centralized controller for the system bus, the memory bus, the AGP bus, and the
Accelerated Hub Architecture interface. The ICH5 is a centralized controller for the board's I/O
paths. The FWH provides the nonvolatile storage of the BIOS.
For information about
The Intel 865P chipset
Resources used by the chipset

1.6.1 Universal 0.8 V / 1.5 V AGP 3.0 Connector

The AGP connector supports the following:
•
4x, 8x AGP 3.0 add-in cards with 0.8 V I/O
•
1x, 4x AGP 2.0 add-in cards with 1.5 V I/O
•
AGP Digital Display (ADD) cards
24
Dual Channel Configuration with Dynamic Mode
(DIMMs matched)
Intel
Channel B DIMM
82865P
MCH
Characteristics
DIMMs matched
Single DIMM
DIMMs not matched
OM17045
Refer to
http://developer.intel.com/
Chapter 2