HoMedics Circulator Instruction Manual page 20

IB-CB200GB-1213-02_Layout 1 16/12/2013 12:02 Page 20
IMPORTANT INFORMATION
Electro Magnetic Compatibility (EMC)
1. The CIRCULATOR needs special precautions regarding EMC and needs to be installed and put into service
according to the EMC information provided in the ACCOMPANYING DOCUMENTS;
2. Portable and mobile RF communications equipment can affect the CIRCULATOR.
3. Warning that the use of accessories, transducers and cables other than those specified with the exception
of transducers and cables sold by the manufacturer of the CIRCULATOR as replacement parts for internal
components, may result in increased EMISSIONS or decreased IMMUNITY of the CIRCULATOR.
4. Warning that the CIRCULATOR should not be used adjacent to or stacked with other equipment.
Guidance and manufacturer's declaration – electromagnetic emissions
The CIRCULATOR is intended for use in the electromagnetic environment specified below. The customer or
the user of the CIRCULATOR should assure that it is used in such an environment.
Emission test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Compliance Electromagnetic environment – guidance
The CIRCULATOR uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are
Group 1
not likely to cause any interference in nearby electronic
equipment.
Class B
The CIRCULATOR is suitable for use in all establishments,
including domestic establishments
Class A
and those directly connected to the public low-voltage
power supply network that supplies buildings used for
domestic purposes.
Complies
20