Philips SACD1000 Instructions For Use Manual page 25

Speaker settings
Allows you to select speaker settings, volume balance
and delay time, and to test the speaker settings. Speaker
settings are only active on the Multi-channel Audio Out
Outputs. Speaker settings will not be used during
playback in the SACD Stereo or Multi-channel Sound
modes.
Karaoke vocal
Switch this setting to ON only when a multi-channel
karaoke DVD is being played. The karaoke channels on
the disc will then be mixed to a normal stereo sound.
r Language
Select the required Menu, Audio and Subtitle language.
Menu language - The On-screen Menus will be displayed
in the language you select. You can choose from 8
different languages.
Audio language - The sound as well as the DVD menu
will be in the language you select, provided it is available
on the disc in play. If not, speech will revert to the first
spoken language on the disc. You can choose from 16
different languages.
Subtitle language - The subtitles will be in the language
you select, provided it is available on the disc in play. If
not, subtitles will revert to the first subtitle language on
the disc. You can choose from 16 different languages.
Audio language and Subtitle language can also be adapted
via the Menu bar on the screen.
s Features
Sound Mode (SACD only)
Selection of default SACD Sound Mode: Stereo or Multi-
channel. Sound Mode setting can be changed during
playback with the Sound Mode leu on either the player
or the remote control. When selecting Multi-channel,
make sure your sound mode is set up for Multi-channel
reproduction.
Access Control (DVD/VCD only)
Access Control contains the following features:
Disc Lock - When Disc Lock is set to ON, a 4-digit PIN
code must be entered in order to play discs.
Parental control - Allows the conditional presentation of
DVD discs containing Parental Control information.
Status Window
Displays the current status of the player and is displayed
together with the menu bar. In STOP mode, it is
displayed together with the 'Temporary Feedback' Field
in the default screen. See 'the section On-screen Display
information'. Factory setting is ON. Select OFF to
suppress display of the Status Window.
Low Power Stand-by
If this setting is set to ON, the player will go in low-
power stand-by when the Stand-by key (remote control)
is pressed. While in low-power stand-by, scart AUX-I/O
will no longer be available. All external equipment
connected to it will be ignored.
PBC
This feature allows you to disable or enable the PBC
(Playback Control) menu of VCD discs. See under
'Special VCD features': Factory settings is ON.
OPERATION 25