Connecting To A Tv; Channel Settings - Dvd Only - Philips SACD1000 Instructions For Use Manual

Connecting to a TV

Notes
- Depending on your TV, there are various ways to connect
the player. These are shown in the illustration below.
- Please refer to your TV, VCR, and any other User Manual(s)
as necessary to make the optimal connections.
- Do not connect your SACD-player via your VCR because the
video quality could be distorted by the copy protection system.
S-Video (Y/C) connection
1 Connect the S-VIDEO OUT (Y/C) socket (7) to the
corresponding socket on the TV using an optional
S-Video cable.
If you wish to receive the sound via your TV,
connect the STEREO OUT Left and Right output
sockets (1) to the corresponding sockets on the TV
using the audio cable supplied.
Video CVBS connection
1 Connect the VIDEO OUT (CVBS) socket (8) to the
corresponding socket on the TV using the video
cable supplied.
2 If you wish to receive the sound via your TV,
connect the STEREO OUT Left and Right output
sockets (1) to the corresponding sockets on the TV
using the audio cable supplied.
1
MAINS
VOLTAGE SELECTOR RIGHT
220-240V 100-120V
FILTER
1 2 3
GND
STEREO OUT
DIGITAL AUDIO OUT
Dolby Digital/
DTS/MPEG only
R
OPT OUT DIG OUT
20 PREPARATION
8 7
MULTICHANNEL AUDIO OUT
LEFT RIGHT SURR. LEFT SURR. SUBW CENTER
1
2
L (CVBS) ( Y/C )
C C Y
AUDIO VIDEO OUT R B S-VIDEO

6 Channel settings - DVD only

Front speaker
L (Large) : When the front speakers can reproduce low
frequency signals below 120Hz
S (Small) : When the front speakers cannot reproduce
low frequency signals below 120Hz
Center Speaker
L (Large) : When the center speaker can reproduce low
frequency signals below 120Hz
S (Small) : When the center speaker cannot reproduce
low frequency signals below 120Hz
Off : When the center speaker is not connected
Surround speakers
L (Large) : When the surround speakers can reproduce
low frequency signals below 120Hz
S (Small) : When the surround speakers cannot
reproduce low frequency signals below 120Hz
Off : When the surround speakers are not
connected
Subwoofer
On : When you connect a subwoofer
Off : When a subwoofer is not connected
Center
speaker
Front speaker
TV
left
Rear speaker
(left surround)
Front speaker
right
Rear speaker
(right surround)