Philips DVDR 80 Owner's Manual page 38

8
When the channel search is completed, 'Auto ch. search
complete' will appear on the TV screen.
9
Press SYSTEM-MENU repeatedly to remove all the menus
from the screen.
a Very few TV channels were found
b During 'Automatic channel search' the DVD Recorder detects
whether an antenna or a cable TV signal is connected. If you have
connected a cable TV signal but found very few TV channels, you
must search the channels manually.
To do so, select 'Cable/Antenna' instead of line 'Auto Ch.
1
Programming' in step 6 and confirm with C .
If you select 'Cable', channels 1-125 will be available.
2
If you select 'Anten.', channels 2-69 will be available.
Select your type of connection by pressing C repeatedly:
'Anten.', 'Cable' or 'Auto.' automatically detects which one you
have.
Confirm the setting with OK .
3
Press SYSTEM-MENU to go to the next menu. Press OK to
4
start channel search as prompted by the on-screen message. When
the channel search is complete, press SYSTEM-MENU repeatedly
to remove all the menus.
You can read about how to search for a TV channel manually in the following section 'Adding
and deleting TV channels manually'.
26
Installation
Auto Ch. Programming
Searching for TV channels
000 Channels found
Please wait
Problem
Installing your DVD Recorder