Allocating A Decoder - Philips DVDR80 Operating Instructions Manual

Installation
Manual search
Channel/freq.
Entry/search
Programme number
TV channel name
Decoder
TV system
NICAM
Fine tuning
26

Allocating a decoder

Some TV channels send coded TV signals that can only be viewed properly with a purchased or
rented decoder. You can connect such a decoder (descrambler) to your DVD recorder. The
following function automatically activates the connected decoder for the TV channel you want to
watch.
How do I allocate the decoder for Easy Link?
If your TV set supports 'Easy Link' the decoder must be assigned to the
relevant TV channel on the TV set (see the operating instructions for your TV
set). Settings cannot then be made in this menu.
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Switch on the DVD recorder using STANDBY-ON m .
3
Use the P+ A and P- B buttons or the number buttons 0..9 on
the remote control to select the TV channel for which you want to
use the decoder. If necessary, use the MONITOR button to switch to
the internal tuner.
4
Press the SYSTEM-MENU button on the remote control. The menu
bar appears.
5
Select '
6
Select 'Installation' using P- B or P+ A and confirm with C .
7
Select 'Manual search' using P- B or P+ A and confirm with C .
8
Select 'Decoder' using P- B or P+ A .
9
Select 'On' with D or C .
CH
01
01
BBC1
How do I switch the decoder off again?
Off
Use C to select 'Off' in the 'Decoder' line on the screen (Decoder off).
PAL-BG
On
0
0
Confirm with OK .
To store
Press OK
A
To end, press SYSTEM-MENU .
Your decoder has now been allocated to this TV channel.
' symbol with D or C .
A
Installing your DVD recorder
?
?