Harman Kardon DVD 38 Service Manual page 24

DVD38
INSTALLATION
Step Four – Turn On the DVD 38
Plugging the DVD 38 into AC power places it in Standby mode, which
is indicated by the Power Indicator (surrounding the Standby/On Switch)
turning amber.
NOTE: When HDMI connections are used, turn on your
television or video display before turning on the receiver and
DVD 38.
There are several ways in which the DVD 38 may be turned on from
Standby mode.
a) Press the Standby/On Switch on the front panel or remote.
See Figure 16.
Figure 16 – Standby/On Switch
b) Press the Open/Close Button on the front panel or remote.
See Figure 17.
Figure 17 – Open/Close Button
Pressing the Open/Close Button will also open the disc drawer.
c) Press the Play Button on the front panel or remote. If a disc is
present, it will begin playing automatically. See Figure 18.
Figure 18 – Play Button
After customizing a few settings in the Initial Setup section, you
may soon enjoy the finest in home entertainment.
24
harman/kardon