Integra DTR-7.7 Instruction Manual page 50

Listening to the Radio—Continued
Receiver
Enter
Display
Selecting XM Radio Channels
There are two ways to select XM radio channels:
• Channel Search mode: select any channel.
• Category Search mode: select channels by category.
Note:
You can't select Channel Search or Category Search
mode, while the Tuning Arrow
flashing, as tuning is in progress.
■ Channel Search Mode
1
Press the [Receiver] button, fol-
lowed by the [Enter] button to
select Channel Search mode.
2
Use the Up and Down [
buttons to select a channel.
You can also use the Left and Right
[
■ Category Search Mode
1
Press the [Receiver] button, fol-
lowed by the [Enter] button to
select Category Search mode.
2
Use the Left and Right [
buttons to select a category, and
use the Up and Down [
buttons to select a channel in
that category.
50
indicators are
]/[ ] buttons to select a category.
Selecting XM Channels from the Front Panel:
1
2
3
]/[ ]
Selecting the Previous Channel:
1
AV receiver
Remote
controller
]/[ ]
]/[ ]
Display
/
Tuner Return
Press the [Tuning Mode] button
to select Channel Search or Cate-
gory Search mode.
Press the [Enter] button repeat-
edly to select a category.
Use the Tuning Up and Down
[ ]/[ ] buttons to select a chan-
nel.
In Channel Search mode, you can
select any channel.
In Category Search mode, you can only
select channels from the currently
selected category.
To listen to the previously
selected XM channel, press the
[Return] button.