Table of Contents
Advertisement
TD205.QX33 01.3.3 1:39 PM Page 30
VIDEO SETTINGS
1
Press the SETUP button.
•
The setup screen will appear.
2
Press the K K /L L or number buttons to select
VIDEO, and then press the ENTER button.
3
Press the K K /L L or number buttons to select an
item, and then press the ENTER button.
SETUP/VIDEO
•
Full-height pictures are shown with one or both
TV MODE
sides trimmed.
1. 4:3 PAN&SCAN
•
2. 4:3 LETTER BOX
Wide screen (full-width) pictures are shown
3. 16:9 WIDE
with black bars at top and bottom.
•
This is not available for TV/DVD.
Enter,
Back
Exit
SETUP/VIDEO
STILL MODE
•
AUTO is normally selected.
1. AUTO
2. FIELD
•
If pictures are blurred in auto mode.
3. FRAME
•
For showing motionless pictures at high
resolution in still mode.
Enter,
Back
Exit
4
Press the K K /L L or number buttons to select the
desired item, and then press the ENTER but-
ton.
5
Press the SETUP button.
•
The setup mode will be canceled and the ordinary
screen will appear.
NOTE:
•
If the number buttons are used in steps 2 to 4, the
settings are immediately selected. (You do not need
to press the ENTER button.)
1
Press the SETUP button.
•
SETUP
The setup screen will appear.
1. LANGUAGE
2. VIDEO
3. AUDIO
4. LOCK
5. OTHERS
Enter
/
Exit
2
Press the K K /L L or number buttons to select
AUDIO, and then press the
ENTER button.
SETUP/VIDEO
1. TV MODE
[4:3LB]
2. STILL MODE
[AUTO]
Enter,
Back
Exit
3
Press the K K /L L or number buttons to select an
item, and then press the ENTER button.
SETUP/AUDIO
DIGITAL OUT
1. PCM
2. DOLBY DIGITAL [OFF]
3. DTS
Enter,
SETUP/AUDIO
VIRTUAL 3D
1. OFF
2. ON
Enter,
4
Press the K K /L L or number buttons to select the
desired item, and then press the ENTER but-
ton.
•
If PCM, DOLBY DIGITAL or DTS is selected on
the DIGITAL OUT setting screen, press the K/L or
number buttons again to select a further item, and
then press the ENTER button.
SETUP/AUDIO
PCM
1. 48kHz
2. 96kHz
Enter,
SETUP/AUDIO
DOLBY DIGITAL
1. OFF
2. ON
Enter,
SETUP/AUDIO
DTS
1. OFF
2. ON
Enter,
- 30 -
AUDIO SETTINGS
•
Sets the sample rate for playing a disc recorded
with high sound quality.
[48kHz]
•
When a Dolby Digital decoder is connected.
[OFF]
•
When a DTS decoder is connected.
Back
Exit
•
To activate the 3D effect.
Back
Exit
•
Audio signals are converted to 48 kHz/16 bit
signals for digital output when playing a DVD
recorded with high sound quality (48 kHz/
20 bit/24 bit, 96 kHz).
•
Sound is reproduced at the high quality of
96 kHz when playing a DVD recorded with high
sound quality (48 kHz/20 bit/24 bit, 96 kHz).
Back
Exit
For 48 kHz discs or when 4:3 LETTER BOX
is selected in TV MODE, sound is reproduced
at 48 kHz.
•
When a Dolby Digital decoder built-in amplifier
is used.
Back
Exit
•
When a DTS decoder built-in amplifier is used.
Back
Exit
SETUP
1. LANGUAGE
2. VIDEO
3. AUDIO
4. LOCK
5. OTHERS
Enter
/
Exit
SETUP/AUDIO
1. DIGITAL OUT
2. VIRTUAL 3D
[OFF]
Enter,
Back
Exit
EN
0I04
Advertisement
Table of Contents
