Advertisement

SERVICE MANUAL
Ver 1.0 2003. 05
CD player
System
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wavelength: λ = 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance
of 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
D-A conversion
1-bit quartz time-axis control
Frequency response
+1
20 - 20 000 Hz
dB (measured by JEITA CP-
–2
307)
Output (at 4.5 V input level)
Headphones (stereo minijack)
Approx.5 mW + Approx. 5 mW at 16 Ω
Radio
Frequency range (9k/10k switch)
•9 kHz step:
TV: 2 - 13 ch
WB (weather band): 1 - 7 ch
FM: 87.5 - 108.0 MHz
AM: 531 - 1 710 kHz
•10 kHz step:
TV: 2 - 13 ch
WB (weather band): 1 - 7 ch
FM: 87.5 - 108.0 MHz
AM: 530 - 1 710 kHz
Sony Corporation
9-877-312-01
2003E1600-1
Personal Audio Company
© 2003.05
Published by Sony Engineering Corporation
D-NF610/NF611
Photo : D-NF610
SPECIFICATIONS
Antenna
FM: Headphones/earphones cord antenna
AM: Built-in ferrite bar antenna
General
Power requirements
For the area code of the model you
purchased, check the upper left side of the
bar code on the package.
• Two LR6 (size AA) batteries: 1.5 V DC × 2
• AC power adaptor (DC IN 4.5 V jack):
U, U2, CND, E92, MX and TW models:
120 V, 60 Hz
AEP, EE, EE1, E, E13
and E13/2 models: 220 - 230 V, 50/60 Hz
CEK model: 230 V, 50 Hz
AUS model: 240 V, 50 Hz
EU8, EU8/C, JE.W, E18, KR and EE8
models: 100 - 240 V, 50/60 Hz
HK model: 230 V, 50 Hz
1
Battery life*
(approx. hours)
(When you use the CD player on a flat and stable
surface.)
Playing time varies depending on how the CD
player is used.
When using two Sony alkaline batteries
LR6 (SG) (produced in Japan)
Audio CD
2
ATRAC3plus files*
3
MP3 files*
RADIO ON
Model Name Using Similar Mechanism
CD Mechanism Type
Optical Pick-up Name
*1 Measured value by the standard of JEITA
(Japan Electronics and Information Technology
Industries Association)
*2 When recorded at 48 kbps or 64 kbps
*3 When recorded at 128 kbps
Operating temperature
5°C - 35°C (41°F - 95°F)
Dimensions (w/h/d) (excluding
projecting parts and controls)
Approx. 136.0 × 25.4 × 156.3 mm
3
(5
× 1 × 6
8
Mass (excluding accessories)
Approx. 215 g (7.6 oz.)
Design and specifications are subject to change
without notice.
• Abbreviation
AUS : Australian model
CND : Canadian model
E13
: 220-230 V AC area in E model
E92
: 120 V AC area in E model
EE
: East European model
HK
: Hong Kong model
KR
: Korean model
MX
: Mexican model
G-PROTECTION
TW
: Taiwan model
"1"
"2"
48
43
75
75
70
70
PORTABLE CD PLAYER
62
US Model
Canadian Model
AEP Model
UK Model
E Model
NEW
CDM-3325ER2
DAX-25E
1
in.)
4

Advertisement

Table of Contents
loading

Summary of Contents for Sony D-NF611

  • Page 1 : East European model player is used. TV: 2 - 13 ch : Hong Kong model When using two Sony alkaline batteries WB (weather band): 1 - 7 ch : Korean model LR6 (SG) (produced in Japan) FM: 87.5 - 108.0 MHz...
  • Page 2: Table Of Contents

    CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY.
  • Page 3: Servicing Note

    D-NF610/NF611 SECTION 1 SERVICING NOTE BEFORE REPLACING THE OPTICAL PICK-UP BLOCK NOTES ON HANDLING THE OPTICAL PICK-UP Please be sure to check thoroughly the parameters as par the “ O ptical BLOCK OR BASE UNIT Pick-Up Block Checking Procedures” (Part No.: 9-960-027-11) issued separately before replacing the optical pick-up block.
  • Page 4: General

    D-NF610/NF611 SECTION 2 GENERAL This section is extracted from instruction manual. CD player (front) 1 i (headphones) 9 Display jack (pages 13, 16, 19 - 24, 26 - 28) (pages 11, 29) 2 VOL (volume) q; SOUND button +*/– buttons (pages 27, 28) (page 11) qa Strap holes...
  • Page 5: Disassembly

    D-NF610/NF611 SECTION 3 DISASSEMBLY Note : Disassemble the unit in the order as shown below. LID (UPPER) ASSY CABINET (FRONT) ASSY CD MECHANISM (CDM-3325ER2) MAIN BOARD TURN TABLE MOTOR ASSY MOTOR ASSY (SLED) (M902), (SPINDLE) (M901) OPTICAL PICK-UP (DAX-25E) Note : Follow the disassembly procedure in the numerical order given.
  • Page 6 D-NF610/NF611 3-2. Cabinet (Front) Assy 1 nine screws (B2) cabinet (front) assy four claws 3-3. CD Mechanism (CDM-3325ER2), MAIN Board three insulators CD mechanism (CDM-3325ER2 ) flexible board (15P) (CN601) connector (CN401)(2P) connector (CN402)(4P) sheet MAIN board...
  • Page 7 D-NF610/NF611 3-4. Turn Table Motor Assy (Spindle)(M901) 1 three screws (B1.7 × 4) 2 turn table motor assy (spindle) (M901) 3-5. Motor Assy (SLED)(M902), Optical Pick-Up (DAX-25E) 1 three screws (B1.7 × 4) 2 gear cover 5 feed screw assy 4 gear B 6 sled spring 3 motor assy...
  • Page 8: Electrical Adjustment

    D-NF610/NF611 SECTION 4 ELECTRICAL ADJUSTMENT The CD section adjustments are done automatically in this set. Focus bias Check Condition: Precautions for Check • Hold the set in horizontal state. Perform check in the order given. • Terminate TAP805 (open) by solder. Use YEDS-18 disc (Part No.: 3-702-101-01) unless otherwise indicated.
  • Page 9 D-NF610/NF611 0 dB = 1 µV TUNER SECTION • Repeat the procedures in each adjustment several times for the maximum level meter indication. • Switch Location and mode setting • The AM tracking adjustments should be finally done by the VOLUME : MAX trimmer capacitors.
  • Page 10: Diagrams

    D-NF610/NF611 SECTION 5 DIAGRAMS NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS Note on Printed Wiring Board Note on Schematic Diagram: • X : parts extracted from the component side. • All capacitors are in µ F unless otherwise noted. pF: µ µ F 50 WV •...
  • Page 11: Block Diagram

    D-NF610/NF611 5-1. Block Diagram – MAIN Section – FM ANT IC301 TU-L HEADPHONE AMP TUNER SECTION IC601 TU-R TU-L_I RF AMP,SERVO,DSP, D/A CONV,D-RAM CONT TU MUTE TU-R_I AOUT1 CD-L_I OPTICAL PICK-UP J301 AOUT2 CD-R_I DAX-25E POWER-L_O D309 DETECTOR CENTER-AMP RFAC LRMU MUTE-SW_I RFDC...
  • Page 12: Tuner Section

    D-NF610/NF611 – TUNER Section – FM ANT EXCEPT US 2 FM-RF_I B.P.F FM /AM IF/RF AMP TU-L MAIN 10.7MHz SECTION FM-IF_I FM-MIX_O 4 B.P.F 1 TV-RF_I TU-R R_O 15 AM FERRITE-BAR 450kHz TU MUTE ANTENNA AM-MIX_O 5 AM-IF_I AM_BP FM-RF_O LOCAL/DX DTS MICROCONTROLLER VERSION SETTING...
  • Page 13: Printed Wiring Board

    D-NF610/NF611 5-2. Printed Wiring Board – MAIN Board (Side A)(1/2) – • : Uses unleaded solder. MAIN BOARD (SIDE A-1) TP15 TJ22 C157 • Semiconductor Location TJ24 VDR3 TP25 Ref. No. Location C151 OPTICAL PICK-UP D308 BLOCK C626 DAX-25E IC62 TJ23 C160 C163...
  • Page 14: Printed Wiring Board

    D-NF610/NF611 5-3. Printed Wiring Board – MAIN Board (Side A)(2/2) – • : Uses unleaded solder. MAIN BOARD (SIDE A-2) M902 SLED MOTOR C107 R110 C313 C312 C302 S806 C315 S811 R204 TP403 VOL + C325 C311 R311 TJ415 BT410 BT403 R210 R319...
  • Page 15: Printed Wiring Board - Main Board (Side B)(1/2)

    D-NF610/NF611 5-4. Printed Wiring Board – MAIN Board (Side B)(1/2) – • : Uses unleaded solder. MAIN BOARD (SIDE B-1) • Semiconductor Location Ref. No. Location D303 D304 D305 D309 IC603 IC601 IC603 IC603 TJ10 R638 R639 R640 R641 Q601 R642 R645 C696...
  • Page 16: Printed Wiring Board - Main Board (Side B)(2/2)

    D-NF610/NF611 5-5. Printed Wiring Board – MAIN Board (Side B)(2/2) – • : Uses unleaded solder. MAIN BOARD (SIDE B-2) DRY BATTERY SIZE "AA" (IEC DESIGNNATION LR6) 2PCS. 3V TP739 TP741 D310 TP601 C307 TP740 TP602 TP738 TP906 FB411 R310 IC82 TP84 IC82...
  • Page 17: Schematic Diagram - Main Board (1/5)

    D-NF610/NF611 5-6. Schematic Diagram – MAIN Board (1/5) – • See page 10 for Wavefoms. • See page 27 for IC Pin Function Descritions. C621 47 6.3V R612 X601 C696 16.934MHz C619 6.3V R636 VDR610 AVRM1608C120MT6A CN601 TP601 C697 L602 TP611 XWRE VDR601...
  • Page 18: Schematic Diagram - Main Board (2/5)

    D-NF610/NF611 5-7. Schematic Diagram – MAIN Board (2/5) – • See page 10 for Wavefoms. • See page 23 for IC Block Diagrams. R328 R332 R331 C322 C324 0.047 TJ302 VR_CTRL FB603 MAIN R310 C305 BOARD 2.2k (5/5) (Page 21) C307 0.047 R145...
  • Page 19: Schematic Diagram - Main Board (3/5)

    D-NF610/NF611 5-8. Schematic Diagram – MAIN Board (3/5) – • See page 10 for Wavefoms. • See page 24 for IC Block Diagrams. MAIN BOARD (1/5) (Page 17) TP413 CN401 TP414 TP409 TP410 TP411 TP412 R452 220k D421 MA111-TX CN402 R415 470k R414...
  • Page 20: Schematic Diagram - Main Board (4/5)

    D-NF610/NF611 5-9. Schematic Diagram – MAIN Board (4/5) – • See page 10 for Wavefoms. • See page 22, 26 for IC Block Diagrams. • See page 30 for IC Pin Function Descritions. MAIN BOARD (2/5) MAIN BOARD (1/5) (Page 18) (Page 17) FB703 TAP805...
  • Page 21: Schematic Diagram - Main Board (5/5)

    D-NF610/NF611 5-10. Schematic Diagram – MAIN Board (5/5) – • See page 10 for Wavefoms. • See page 22, 25 for IC Block Diagram. (TUNER BLOCK) VT(A) VT(B) 100p C160 470k 470k 470k KV1610S 2200p BA-AnT(mW) 220p MAIN Am OSC 0.01 0.01 BOARD...
  • Page 22: Ic Block Diagram

    D-NF610/NF611 5-11. IC Block Diagrams IC1 TA2154FN (EL) IC62 AK93C55AV-L VREF GENERATOR INSTRUCTION DECODE CONTROL DECODER BUFFERS CLOCK GENERATION EEPROM R/W AMPS 2048bit INSTRUCTION 128 X 16 AUTO ERASE REGISTER DATA REGISTER IC82, IC802 MM3031JULE Current Limit Vref...
  • Page 23 D-NF610/NF611 IC301 AN17882A-E1 PRE-GND BASE_NF BIAS TU_R_1 MIX_0 CD_R_1 AGC_SW VOL BIAS LINE-L_0 LINE-R_0 VCC1 VOL-L_1 VOL-BIAS Volume Control VOL-R_1 RIPPLE-F TU-L-ATT VOL-CTL_1 Input Control TU-R-ATT MUTE BEEP IN-SEL AVLS_SW...
  • Page 24 D-NF610/NF611 IC403 TB2138AFG 60 59 58 57 56 55 VREF DC IN LATCH DC IN H BRIDGE H BRIDGE H BRIDGE REGB DATA LEVEL CONTROLLER DET(0.29V) SHIFTER CLOCK DCIN_S(IMM1) WAKEUP CONTROL BAND GAP CHGB CHARGE (LD)XRST VMMNT_O STANDBY BIAS VCPU RSTOUT CLX &...
  • Page 25 D-NF610/NF611 IC701 CXR710160-201R 64 63 62 61 60 59 58 57 56 55 52 51 50 49 PE3/RxD1 PE2/TxD1 PE1/RxD0 PE0/TxD0 INTERFACE LRCKI BCKI VDIOCD0 PCMDI DVDD4 CD-ROM TAPTD0 INTERFACE SCANEN DVDD0 DVSS0 DVSS2 DVIO0 DVDD2 VDIOCD1 EEPROM SERIAL PC3/SCS0 INTERFACE PF4/XRDE PC2/SI0...
  • Page 26 D-NF610/NF611 IC803 AK6417CH-E2 DATA REGISTER R/W AMPS AUTO ERASE INSTRUCTION EEPROM REGISTER INSTRUCTION DECODE CONTROL RDY/BUSY 16384bit CLOCK 1024 16 DECODER GENERATION BUFFERS VPP SW RESET GENERATOR VREF...
  • Page 27: 5-12. Ic Pin Function Descriptions

    D-NF610/NF611 5-12. IC Pin Function Descriptions • IC601 CXD3048R (RF AMP, DIGITAL SIGNAL PROCESSOR, DIGITAL SERVO PROCESSOR, D-RAM CONTROLLER) Pin No. Pin Name Description XRAS Low address strobe signal output to the D-RAM Data input enable signal output to the D-RAM 3 to 6 D1, D0, D3, D2 Two-way data bus with the D-RAM...
  • Page 28 D-NF610/NF611 Pin No. Pin Name Description TEST Input terminal for the test (fixed at “ L ” ) VSS1 — Ground terminal LRMU Muting on/off control signal output to TA2120FN DOUT Not used (open) ATSK Not used (open) DFCT Not used (open) Focus OK signal output to TMP91CW28FG MIRR Not used (open)
  • Page 29 D-NF610/NF611 Pin No. Pin Name Description PCMD_I Serial data input from CXR710 BCK_O Bit clock signal output to CXR710 BCK_I Bit clock signal input from CXR710 DVDD — Power supply 113 to 117 A3 to A0, A10 Address signal output to the D-RAM Not used (open) 119, 120 TEST3, TEST4...
  • Page 30 D-NF610/NF611 • IC801 TMP91CW28FG (SYSTEM CONTROL) Pin No. Pin Name Description — Ground terminal — Ground terminal VCPU — Power supply (+2.0 V) XRST_O System reset signal output PWM_O Power on/off signal output (Not used) BEEP_O Beep signal output AMUTE_O Mute signal output to CXD3048R LINEOUT_I Not used (open)
  • Page 31 D-NF610/NF611 Pin Name Description Pin No. BAT_VCC_ON_O Not used (open) DTS_RST_O Not used (open) AT3_MP3_V_O Reset signal input P/S_O P/S signal output to LCD unit — Ground terminal XNMI_I Not used (fixed at “ H ” ) VCPU — Power supply (+2.0 V) HP_LIN_SEL_I HP/LINE select input (fixed at “...
  • Page 32: Exploded Views

    D-NF610/NF611 SECTION 6 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • Abbreviation The components identified by mark 0 or may have some difference from the original one. CND : Canadian model dotted line with mark 0 are critical for safety. •...
  • Page 33 D-NF610/NF611 6-2. Cabinet (Rear) Section CD mechanism deck section (CDM-3325ER2) not supplied not supplied Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks X-3383-614-1 CABINET (REAR) ASSY 4-223-609-21 KNOB(JOGGABLE) 3-250-855-01 ORNAMENT(JOG) 3-249-875-01 BOARD(+), TERMINAL, BATTERY 3-250-782-01 HOLDER(LCD) 3-249-876-01 BOARD(-), TERMINAL, BATTERY 1-805-092-11 DISPLAY PANEL, LIQUID CRYSTAL 3-245-557-01 TERMINAL, BATTERY LINK...
  • Page 34 D-NF610/NF611 6-3. Optical Pick-Up Section (CDM-3325ER2) M902 M901 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-318-203-61 SCREW (B1.7X4), TAPPING 3-221-475-01 SHAFT, STANDARD 3-221-474-01 SPRING, SLED A-3331-663-A SCREW (FEED) ASSY 3-221-472-02 CHASSIS 3-221-268-01 GEAR (B) 0 104 X-3380-950-1 OPTICAL PICK-UP (DAX-25E) 3-221-473-01 COVER, GEAR 3-222-298-01 RACK...
  • Page 35: Electrical Parts List

    D-NF610/NF611 SECTION 7 MAIN ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • Items marked “ * ” are not stocked since they • CAPACITORS parts list may be different from the parts are seldom required for routine service. uF: µF specified in the diagrams or the components Some delay should be anticipated when order-...
  • Page 36 D-NF610/NF611 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C153 1-107-819-11 CERAMIC CHIP 0.022uF 10.00% 16V C433 1-115-156-11 CERAMIC CHIP C157 1-107-819-11 CERAMIC CHIP 0.022uF 10.00% 16V C434 1-165-851-91 TANTAL. CHIP 10uF 6.3V C435 1-126-205-11 ELECT CHIP 47uF 6.3V C158...
  • Page 37 D-NF610/NF611 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C802 1-164-941-11 CERAMIC CHIP 0.0047uF 10.00% 16V < FERRITE BEAD > C803 1-125-837-91 CERAMIC CHIP 6.3V 1-414-760-21 FERRITE C804 1-125-837-91 CERAMIC CHIP 6.3V FB101 1-414-760-21 FERRITE C805 1-115-156-11 CERAMIC CHIP FB201...
  • Page 38 D-NF610/NF611 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks L406 1-400-145-21 INDUCTOR 47uH 1-218-957-11 RES-CHIP 2.2K 1/16W 1-218-973-11 RES-CHIP 1/16W L407 1-456-178-21 INDUCTOR 100uH 1-218-961-11 RES-CHIP 4.7K 1/16W L408 1-400-388-21 INDUCTOR 220uH 1-218-953-11 RES-CHIP 1/16W L409 1-400-145-21 INDUCTOR 47uH...
  • Page 39 D-NF610/NF611 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 1-218-990-11 SHORT CHIP R454 1-218-990-11 SHORT CHIP 1-218-945-11 RES-CHIP 1/16W R456 1-218-990-11 SHORT CHIP 1-218-961-11 RES-CHIP 4.7K 1/16W R459 1-218-977-11 RES-CHIP 100K 1/16W 1-218-949-11 RES-CHIP 1/16W 1-218-957-11 RES-CHIP 2.2K 1/16W...
  • Page 40 D-NF610/NF611 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R662 1-218-973-11 RES-CHIP 1/16W R845 1-218-990-11 SHORT CHIP R663 1-218-977-11 RES-CHIP 100K 1/16W R848 1-218-990-11 SHORT CHIP R670 1-218-961-11 RES-CHIP 4.7K 1/16W R699 1-216-864-11 METAL CHIP 1/16W R865 1-218-965-11 RES-CHIP...
  • Page 41 D-NF610/NF611 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks S801 1-786-442-21 SWITCH, KEY BOARD(u) 3-252-232-51 MANUAL, INSTRUCTION(EE) S802 1-786-442-21 SWITCH, KEY BOARD(>) 3-252-232-71 MANUAL, INSTRUCTION(US) S803 1-786-442-21 SWITCH, KEY BOARD(.) S804 1-692-014-11 SWITCH, KEY BOARD(+) 3-252-232-81 MANUAL, INSTRUCTION(CND) 3-253-606-11 MANUAL, INSTRUCTION(US,ENGLISH) S805...
  • Page 42 D-NF610/NF611 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2003.05...

This manual is also suitable for:

D-nf610

Table of Contents