Section 4 : Lg And Doors - X-Treme Jets F-16C Instruction Manual

Section 4:
Assembling Landing Gear & Gear
Doors
Items Required: (if not factory fit)
1. Fuselage
2. L/G set
3. Gear doors
4. Off set hinges (9)
5. Gear door cylinder brackets (3)
6. Door cylinders (3 x 30mm)
7. Air kit and sequencers
8. Drill
9. 5 minute epoxy
We will describe the model with gear and doors factory
installed. We highly recommend this version. It will
safe you plenty of time and frustrations.
Make sure gear and doors work correctly when you un-
pack the kit. Check for damage.
Step 1. Remove the nose unit.
Step 2. Fit the 8511 servo to the servo plate located
next to the nose gear unit.
Step 3. Fit pushrod to nose unit and refit unit.
Step 4. Secure steering pushrod to nose leg unit. Re
tract the nose gear and check free operation.
Step 5. Check all bolts on landing gear units. Secure
with locktite.
Step 6. All airlines will be factory fitted and routed.
Step 7. Check operation of retract units and gear doors.
This complete this section!
P-14