Viewing the Connection Panel
TV Rear Panel
Connecting CI (Common Interface) Card
- When not inserting "CI Card" in some channels, "Scramble Signal" is displayed on
the screen.
- The pairing information containing a telephone number, CI CARD ID, Host ID,
and other information will be displayed in about 2~3 minutes. If an error message is
displayed, please contact your service provider.
- When the channel information configuration has finished, the message "Updating
Completed" is displayed, indicating that the channel list is now updated.
You must obtain a CI CARD from a local cable service provider.
Remove the CI CARD by carefully pulling it out with your hands since
dropping the CI CARD may cause damage to it.
Service Post
- Connector for engineer.
English-8
CI Card
Please insert
the card as shown