Playing The Radio - Insignia NS-P4113 User Manual

NS-P4113 Portable CD/MP3/WMA Player and Digital FM Tuner
7 Repeat the Steps 3 through 6 to program as many as 24 tracks.
8 Press the
9 To cancel the playlist, press and hold the MODE/CLEAR button
for three seconds.
Using the anti-shock feature
When your CD player moves during playback (for example, when
your are walking or in a moving vehicle), your player may be subject
to bumps or vibrations.
When you press the
automatically and ESP flashes on the display. The CD spins faster
and your CD player stores the audio in memory to make sure that
playback does not pause or skip.
If your player is bumped or vibrated too much, the memory buffer gets
full and ESP stops flashing on the display. If the memory buffer is full,
the sound mutes for a short time. After the bumping or vibration
stops, your player resumes normal playback.
Note
You should use the anti-shock feature only when necessary.
Using the anti-shock feature while your CD player is running
on battery power uses additional battery power.
To turn off the anti-shock feature when playing an audio CD,
press the MENU/ESP/PRESET button. You cannot turn off
the anti-shock feature when playing an MP3 or WMA CD.
The anti-shock feature will not correct playback errors if the
CD is scratched or dirty.

Playing the radio

Note
The headphone cable is the FM antenna. For best
reception, make sure that the cable is fully extended.
To play the radio:
1 Set the FUNCTION switch to RADIO, then press the
button.
2 Press the MODE/CLEAR button to select FM MONO or
FM STEREO.
Note
If you select FM STEREO and the radio signal is weak,
STEREO appears on the display. Press the MODE/CLEAR
button to switch to FM MONO. The audio plays in mono, but
the background static is reduced.
3 To turn off the radio, press the
button once to start programmed playback.
/
button, the anti-shock feature turns on
/
/
www.insignia-products.com
/
button.
17