Important safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV.
Replacement parts When replacement parts are required, make sure that the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, personal injury, or other hazards. Safety check After completing any service or repair to this device, ask the service technician to perform routine safety...
TV, and are not considered defects. Introduction Congratulations on your purchase of a high-quality Insignia product. Your NS-L7HTV-10A represents the state of the art in LCD TV design and is designed for reliable and trouble-free performance. Package contents •...
TV components Front # Button Description MENU Press to open the on-screen menu. Press to go to the next channel in the channel list. For more information, see “Selecting a TV channel” on page 9. TV/FM Press to switch between TV and radio. SCAN Press to open the auto scan screen.
Back # Item Description In TV mode, connect an antenna (either the included, portable antenna or an external, fixed antenna) or the cable from your cable or satellite TV to this jack. Antenna jack In radio mode, connect an antenna to scan radio stations.
Replacing the remote control battery Note The first time you use the remote control, remove the plastic sheet from the bottom of the battery to activate the remote. To replace the remote control battery: 1 Gently insert a fingernail in the grove marked 1, then gently pull the battery holder in the direction marked 2.
3 When charging is complete, disconnect the AC adapter. Caution Do not disconnect the AC adapter or car adapter until the POWER ON/CHR indicator turns off. Notes • The battery indicator ( when the power is running low. • Charge the built-in, rechargeable battery with a surrounding temperature of 41°F and 95°F (5 and 35°C).
Understanding the basics Turning your TV on or off To turn your TV on or off: • Slide the POWER switch. POWER switch Status position Charging Note Because your TV can be powered by the built-in, rechargeable battery, there is no standby mode. Your TV is either on or off.
3 Press to select Yes, then press OK/ENTER to start the scan. If you do not want to scan for channels, select No. A status screen appears during the scan. RF CH Found Menu/Exit: Exit Your TV scans for channels in your area and stores the information in the channel list.
Selecting a radio station To select a radio station: • Press CH+ and CH–. Pressing one of these buttons skips any radio stations that are not in the radio channel list. The radio station list was created when you scanned for radio stations. Adjusting the volume To adjust the volume: •...
Adjusting the sound To adjust the sound: 1 Press MENU, then press (sound icon). The sound menu opens. TV mode Balance Audio Language Select OK:Enter Video mode Balance Audio Language Select OK:Enter Radio mode Balance Audio Language Select OK:Enter 2 Press OK/ENTER or to access the menu.
Automatically scanning for TV channels using the antenna When you scan for channels, your TV searches for channels available in your viewing area and stores the channel information in the channel list. When you press CH+ and CH–, your TV tunes to the next or previous channel in the channel list and skips any channels that were not stored in the list.
Automatically scanning for channels using cable TV To automatically scan for channels using cable TV: 1 Make sure that you have selected the TV signal source. For more information, see “Selecting the TV signal source” on page 11. 2 Press MENU, then press (TV mode icon).
3 Press OK/ENTER or to access the menu. Antenna/Cable Auto Channel Search Add/Skip Channels Favorites Channel No. Channel Label Select Select Adjust Adjust 4 Press to highlight Add/Skip Channels, then press OK/ENTER or . The following screen appears. Program Name 80.3 PBS1DTV 80.4...
4 Press to highlight a channel you want to add to the favorite channel list, then press OK/ENTER. If the favorite channel list has more than one page, press to scroll through the pages. A check mark appears next to the channel and the channel is added to the favorite channel list.
5 Press to move from character to character and press select a character. You can use as many as seven characters. 6 Press MENU one or more times to return to the previous menu or press EXIT to close the menu. Using closed captioning To use closed captioning: 1 Press MENU, then press...
3 Press to highlight Time, then press OK/ENTER or . The following screen appears. OSD Duration Time Zone Daylight Savings Clock Select Adjust 4 Press to highlight a setting, then press to adjust the setting. You can select: • OSD Duration—Sets the amount of time the OSD remains open when no buttons are pressed.
Adjusting radio options Automatically scanning for radio stations You should scan for radio stations in your area. Your TV stores the information in the radio station list. To automatically scan for radio stations: 1 Press MENU, then press (radio icon). The radio menu opens. Auto Channel Search Favorite Stations Frequency...
4 Press MENU one or more times to return to the previous menu or press EXIT to close the menu. Note The Audio Only function becomes active about three seconds after the TV menu closes. Troubleshooting Problem Solution • Make sure that your TV is turned •...
Page 24
Macrovision statement This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Products and parts replaced under this warranty become the property of Insignia and are not returned to you. If service of Products or parts are required after the Warranty Period expires, you must pay all labor and parts charges.
Need help?
Do you have a question about the 10-0499 and is the answer not in the manual?
Questions and answers