Storing Channels In Memory (Automatic Method) - Samsung TXM2792F Owner's Instructions Manual

O
P E R AT I O N

Storing Channels in Memory (Automatic Method)

1
First, select the correct
signal source (ANT, STD,
HRC, IRC). See steps 1~3
on previous page.
Press the MENU button,
then press the CH
ton twice to select
"Channel," then press the
VOL + button.
2
Press the CH
select "Auto program".
3
Press the VOL + button.
The TV will begin
memorizing all of the
available channels.
4
After all the available
channels are stored, the
Auto program menu reap-
pears. Press the MENU
button twice to exit.
3.6
C T : TV O
HAPTER HREE PERATION
Labeling
but-
button to
Labeling
: ----
: ----
The TV automatically cycles
through all of the available channels
and stores them in memory. This
takes about one to two minutes.
Press the MENU button at any time
to interrupt the memorization
process and return to the Channel
menu.