Placing And Ending Calls - Motorola Timeport P8767 Owner's Manual

Tip:
æ
If you press
ª
(or ) with-
out entering a
number, your
phone will dial
the last number
entered.
26

Placing and Ending Calls

Placing a Call
1. Extend
Antenna
2. Open
Phone
3. Enter
Number
Correct
Errors
4. Place
Call
You can dial phone numbers with up to 32 digits, but only the
last twenty-four digits will appear in the display.
Your phone will display the first 24 digits, then a second screen
will show the digits remaining in the phone number.
Ending a Call
There are three ways to end a call:
Close
or Press Key Press
or Hold
Smart
Button
Extend the antenna completely for best
performance.
Open the phone to expose the keypad.
If necessary, press
Enter the number you want to call,
for example: 555-1212.
Ç
Press to erase one digit at a time if you
make a mistake. Press and hold
the entire entry and start again.
æ ª
Press (or
or
A A A A
Press and hold
You will see: Calling 555-1212.
‰
Press to see the rest of the number.
Close the phone to end a call.
º
.
A A A A
Press and hold
You will see: Press § to End Call.
A A A A
Press again to end the call.
¡
to turn the phone ON.
Ç
) to place the call.
until you hear a high tone.
until you hear a high tone.
to erase