USING ANNUNCIATE MODE
Annunciate mode lets you set the alarm
system so it sounds a brief pre-alarm if it
detects any change in the assigned zone.
1. If the system is disarmed and no
zone is violated, hold down
for about 2 seconds. ARMED and
READY flash slowly.
2. Enter the current security code
within 30 seconds. ARMED and
READY flash rapidly.
3. Press
(annunciate)
ANNC
ARMED and READY turn off.
4. To enable annunciate mode, press
. READY flashes 3 times. If
ENTER
the
alarm
system
change in the assigned zone, it
sounds a brief pre-alarm.
Operation
SETUP
once.
detects
any
19