Microprocessor Control - Mitsubishi Electric MSZ-HC25VA Service Manual

9

MICROPROCESSOR CONTROL

MSZ-HC25VA MSZ-HC35VA MSZ-HC35VAB
WIRELESS REMOTE CONTROLLER
Signal transmitting section
Operation display section
ON/OFF (operate/stop) button
Fan speed control button
Operation select button
Timer mode select button
NOTE : Last setting will be stored after the unit is turned OFF with the remote controller. Indoor unit receives the signal of the
remote controller with beeps.
INDOOR UNIT DISPLAY SECTION
Operation Indicator lamp
The operation indicator at the right side of the indoor unit indicates the operation state.
• The following indication applies regardless of shape of shape of the indication.
Indication
The unit is operating to
reach the set temperature
The room temperature is
approaching the set tem-
perature
Operation state
About 2°C or more away
from set temperature
About 1 to 2°C from set
temperature
Temperature buttons
ECONO COOL button
Vane control button
Time set buttons
RESET button
Room temperature
12
Lighted
Blinking
Not lighted