Table of Contents
Advertisement
4
| DVP User Manual 4.0
2
Logging In
Setup
This section describes the procedure for a first time
Use this information when you first purchase the DVP and
login, and the DVP access rights.
when you are ready to install the hardware at your site. This
section shows the back panel and explains how to connect the
separate input connections to the unit.
The default IP address is:
192.168.1.253
Web Portal Access:
When the unit is initially accessed, it will default to a
"guest" user access however, you'll need to click on the
LOGIN menu item to initiate another login launcher.
To log into the DVP, browse to its IP address using your
Internet browser. There are three levels of access
rights. There is a "user" login, an "author" login, and a
system "admin" login.
August 2009
Access & Network Setup
Administrator Access
The Administrator maintains all rights to the DVP.
1. If you are already logged into the DVP as a user or
author, click on the LOG IN selection at the top of the
main menu. You will be prompted to enter a username
and password.
2. Use the login id "admin". The default password
is "MediaPOINTE". Note that the login id and the
password are case sensitive.
3. From the Security selection of the main menu, the
Administrator can enable or disable logins for users and
authors and can change the admin password.
Advertisement
Table of Contents
