• Make sure the timer cover is always closed, never leave it open after setting the unit or changing the batteries to prevent water damage. • Warranty is void if the feeder is ever submersed or falls into the water. SAVE THESE INSTRUCTIONS WWW.CURRENT-USA.COM...
See Figure A. 3. Test feeder by pressing the "M" button on the timer and ensure that the feed drops into the water and not onto the ground. Ensure feeder is over waters edge Figure A WWW.CURRENT-USA.COM...
Page 4
See Figure B. 3. Test feeder by pressing the "M" button on the timer and ensure that the feed drops into the water and not onto the ground. Figure B WWW.CURRENT-USA.COM...
Press the SET button, digit 1 blinks, then press "+" button to choose 1 or 2 dispensed feedings for more or less food. Press the MODE button to continue to the next feeding time. Keep pressing MODE to exit program. program To program feeding times 2 to 4, the repeat procedure above. WWW.CURRENT-USA.COM...
Page 6
Use two C size 1.5 V alkaline batteries (do not use rechargeable batteries.) If the symbol "LO" appears on the left display, it means the batteies are almost exhausted. The feeding procedure will still be carried out, but batteries will need to be replaced in 2 days. WWW.CURRENT-USA.COM...
Disassemble lid, main body, timer cover and batteries. Allow feeder to dry for 2-3 days. Place new batteries in feeder. If feeder still does not work, contact your dealer. Note: If feeder has been dropped into the water, warranty is void. WWW.CURRENT-USA.COM...
If you discover a defect, Current USA, Inc. will, at it’s option, repair or replace the product at no charge to you, provided you return it during the warranty period. It is required that you present this warranty card and a copy of the bill of sale as proof of original purchase date, in the event the product needs repairs, within the warranty period.