SPT UF-304SS Instruction Manual page 8

1. Remove the bracket from the
bottom of the unit. Remove the
two screws from the bottom
bracket. Remove the foot from
opposite side.
2. Self-Tapping Screws/Bottom
Bracket/Foot, place to one
side.
3. Slide the door downwards,
away from the hinge pin
located on the top of the door.
4. Remove the plastic cover
from door hinge. Unscrew the
two screws from top bracket
and transfer to the other side.
5. Install the top bracket with
the two screws. Slide the door
back onto the top hinge. Be
sure door is the right way up.
Install the plastic cover on the
top bracket by pressing down
until it clicks into position.
9