Cleaning Before Use - SPT UF-304SS Instruction Manual

UNPACKING YOUR UPRIGHT FREEZER
WARNING: Use two or more people to move upright freezer.
Failure to do so can result in back or other injury.
•
Remove tape and any labels from your upright freezer before
using (except the rating label).
•
Any tape or glue residue can be removed by rubbing the area
briskly with your thumb. Or rub the area with a small amount of
liquid dish sop, wipe with warm water and dry.
•
Do not use sharp instruments, rubbing alcohol, flammable fluids,
or abrasive cleaners to remove tape or glue. These products can
damage the surface of your upright freezer.
•
When moving the upright freezer, do not tilt the upright freezer
beyond 45° from upright position.
•
Before initial use, please use
scissor to cut and remove the
plastic cable ties at the center
of each shelf, as shown in
picture. There is a total of
three cable ties.
CLEANING BEFORE USE：
After you remove all of the packaging materials (be sure the foam
between outside condenser and cabinet is removed), clean the
inside of your upright freezer before using it.
4