Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Digi-Frame A4 Multi-Purpose
Summary of Contents for Digi-Frame A4 Multi-Purpose
- Page 1 A4 Multi-Purpose Rechargeable Scanner User’s Guide - 1 -...
-
Page 2: System Requirements
Supported Memory Devices SD / SDHC / MMC / USB Flash Drive System Requirements IBM compatible PC 586, Pentium or higher Windows XP, Vista or Windows 7 At least 100 MB of free hard disk space (500 MB is recommended) ... -
Page 3: Table Of Contents
Contents 1. Introduction………………………………………………………3 2. Overview…………………………………………………………. 2.1 Front View……………………………………………….. 2.2 Rear View…………………………………………………. 3. Installation & Operation…………………………………….. 3.1 Install the battery…………………. 3.2 Charge the battery ……………. 3.3 Insert a memory card or a USB flash drive………….. 3.4 Turn on the scanner……… 3.5 Scan an original…………….. 3.6 Turn off the scanner…………….. -
Page 4: Introduction
1. Introduction Congratulations your purchase DigiFrame EzyScan. With this scanner, you can scan and store your photos & documents directly to your memory card or USB flash drive without connecting the scanner to a computer. If you wish to store a document directly into your computer, just plug in a USB cable and/or use the supplied Scan to PC utility (Compatible with Windows 2000, XP, Vista &... -
Page 5: Power Button
Name Function/ Description Press to turn on or off. Power Button Press to start calibrating the scanner, eject paper in paper jam condition, Custom Button or switch your file format between JPEG and PDF. Indicates the charge status of the battery: High –... -
Page 6: Installation & Operation
3. Installation & Operation Precautions Keep the product out of direct sunlight. Direct exposure to the sun or excessive heat may cause damage. Do not store/operate the product in humid or dusty conditions. Place the product securely on an even, flat surface. Tilted or uneven surfaces may cause mechanical or paper- feeding problems. -
Page 7: Charge The Battery
The recommended battery is attached (3.7V 1700mAH) 3.2 Charge the battery Important! The scanner can be charged either with the Y shape USB cable connected to your computer, or the dual USB AC adapter. Before using the scanner, please first charge the battery through the supplied Y shape USB cable. -
Page 8: Insert A Memory Card Or A Usb Flash Drive
For first-time use, please charge the battery for at least eight hours. One end of the supplied Y shape USB cable including two rectangle USB connectors. These two connectors (one labeled “Power Cable”, the other labeled “Data Cable”) are used to connect to your computer at the same time to increase the transferring speed. -
Page 9: Turn On The Scanner
3.4 Turn on the scanner Press and hold the Power button ( ) for 1~2 seconds. The System LED will blink in red. Power Button System LED Wait until the System LED stops blinking and then is lit in orange. This indicates the scanner is in ready status. The orange System LED also indicates that the scanner will use the predefined scan settings for photos to start a scan, which are JPEG file format, color mode, and resolution at 300... -
Page 10: Scan An Original
3.5 Scan an original Important! Insert only one page or one photo at a time, and insert the next one only when the previous one is done. Otherwise, the scanner may malfunction. The paper detector is quite sensitive. Please do not push your photo, document or card into the feeding slot or the top of your image can be cut. - Page 11 Insert your document FACE UP into the feeding slot. Align your document to the far LEFT EDGE of the feeding slot as indicated. The scanner starts scanning the original when the paper has been fed into the feeding slot. ...
-
Page 12: Turn Off The Scanner
If the memory card or USB flash drive is near full (lower than 1MB), the indicator light blinks (3 times per cycle). Use another card/USB flash drive or delete some files on it if necessary. Remove ALL foreign objects from the photo, such as blu tac, staples, paper clips, and paper sticky notes before feeding it into the scanner due to possible damage to the scanner. -
Page 13: Connecting To A Computer
4. Connecting To A Computer (Card Reader Mode) By connecting the scanner to a computer, you can use the scanner as a memory card or flash drive reader, so that you can freely view or copy files from the memory card or USB flash drive using the computer. -
Page 14: Disconnect The Scanner From A Computer
When the scanner connects successfully to a computer, a Removable Disk (F) (F represents the removable drive letter) will be shown in Windows Explorer. If a memory card or USB flash drive is inserted to the scanner, the Removable Disk may be replaced with the name of the memory card or USB flash drive. -
Page 15: Scanning Documents To Your Computer
5. Scanning Documents To Your Computer With the Scan To PC Manager, you can easily scan photos & documents and save the scanned images directly to a connected computer. You can also choose the location where the scanned images will be saved. 5.1 Starting the Scan To PC Manager ... - Page 16 To save the scanned images to your computer, select Scan To PC in the drop-down menu of Save Type. To save the scanned images to your memory card connected to the scanner, select Memory Card in the drop-down menu of Save Type. Important: Once you have installed the Scan To PC Manager and you wish to save your scanned images to a memory card, you still need to...
-
Page 17: Uninstalling The Scan To Pc Manager
If you have not inserted a memory card to the scanner, a Removable Disk drive will still be shown in Explorer window though you can not access anything from the drive. If you have inserted a memory card to the scanner, the name of memory card will be shown in Explorer window. -
Page 18: Scanning Documents To Smart Phone
Connect the mini USB connector of the supplied Y shape USB cable to the mini USB port on the scanner and the “Data cable” end to the camera connector on your iPad. Y shape USB Cable (Data) Camera connector (Power) iPad ... -
Page 19: Scanning Documents To Smart Phone
7. Scanning Documents To Smart Phone With this scanner, you can scan your photos & documents into some Smart Phones. Remove the memory card from your scanner and turn on. Connect “Data cable” end of the Y shape USB cable to the USB Flash Drive port marked with a USB icon on your scanner and connect the other mini USB end to your Smart Phone. -
Page 20: Scanning Documents To A Macintosh Computer
8. Scanning Documents To A Macintosh Computer Insert a memory card or USB flash drive to the scanner. Press the Power button ( ) to turn on your scanner. Connect the mini USB connector of the supplied Y shape USB cable to the mini USB port at the back of the scanner. -
Page 21: Maintenance
9. Maintenance 9.1 Calibrating the scanner If the scanned image looks fuzzy or there are strange stripes on it, the scanner may need calibrating in order for the sensor to resume its original precision. To calibrate the scanner: Insert a memory card into the memory card slot or a USB flash drive into the USB flash drive port at the back of the scanner. -
Page 22: Cleaning The Scanner Glass
After calibration, system LED lit to show scanner is ready for scanning. If calibration has failed, red LED will appear and flash 4 times per cycle. 9.2 Cleaning the scanner glass The glass in the scanner should be cleaned periodically. If debris is present, the scanned image may have streaks or scratches. -
Page 23: Troubleshooting
10. Troubleshooting 10.1 Frequently asked questions Question: There are strange lines on the scanned image, or the image is not clear. Answer: Check the following: Are there scratches on the original, or is the original clean? Remove any stains or dust from the original before scanning. - Page 24 scanner off and back on and try again. Make sure that you scan the next original only after the scanning process of the previous one has completed. Does the length of the original exceed the maximum acceptable size? Question: The scanner feels warm to the touch. Answer: It is normal for the scanner to emit a small amount of heat (around 30-45 Celsius) after prolonged use.
-
Page 25: The System Led Light Pattern
10.2 The System LED light pattern Light Description Steadily on The scanner is ready for use. Initializing system and memory card/USB flash drive. Please wait until the initialization process is complete before using the scanner. Blinks Busy scanning and storing image files. continuously Please wait until the process is complete before scanning another original. -
Page 26: Specifications
11. Specifications All specifications are subject to change without notice Specification Scanning Technology CIS (Contact Image Sensor) Acceptable paper size 2”x 2” ~ 8.5” x 16” Output image formats JPEG, PDF Flash 512KB Memory Internal 64MB (DDRI) Resolution Scanned image 300 dpi (dots per inch) Scan color depth Color –...