Introduction; Features - Phonic WM400-L User Manual

INTRODUCTION

Congratulations on your purchase of the
WM400(D) wireless receiver, to be used
in conjunction with the WM60 or WM70
wireless transmitters. With either the stereo
or mono WM kits, you are now fast on your
way to becoming completely wireless in your
audio set up. The WM modules are not only
fantastic in style and convenience, however;
they are incredibly easy to use, as this
manual will no doubt prove.
Please have a thorough read of this user's
manual before operating the WM modules.
Inside this guide you will find information on
the ease of your wireless set up, as well as
some great troubleshooting tips and a com-
plete run-down on your modules' features.
After reading, place the manual in an easy to
remember place so that you can come back
to it in future if ever necessary.
4

FEATURES

● Working with the WM60 or WM70 trans-
mitter to form a wireless system for sav-
ing the audio cables between your mixer
and active speakers
● Stand-alone UHF wireless receiver,
compatible with WM60 and WM70 trans-
mitters
● 1VDC external power supply (country
dependent)
● 16 user-selectable frequencies
● RF carrier frequency range:
614.175 - 804.800 MHz (FCC)
614.175 - 864.800 MHz (CE)
● Operating range: 10 ft. (70m, environ-
ment dependent)
● Indicators for power on, AF and RF
● Antenna: external, threaded connector
● Audio output connectors: XLR out
● M6, M8, M10 screws and Velcro strip
included for attaching WM400(D) to any
speakers
WM400D-L or WM400D-R plus:
● 00 ms digital delay processor for com-
pensation of different distance speakers
● 0.1 millisecond to 00.0 millisecond de-
lay range, delay adjustment may be
made with 0.1 millisecond precision
● 0 preset EQ curves and variable high
cut and low cut filters
● 4-digit display to indicate frequency
channel and delay, plus AF, RF and de-
lay bypass indicators
WM 400-R / 400D-R / 400-L / 400D-L