Appendix C: Supported Dvi Resolutions; Appendix D: Software Upgrade - Orion 32FXT906 Operating Instructions Manual

Appendix C: Supported DVI
Resolutions
When connecting devices to your TV's connectors by
using DVI to HDMI cables (not supplied), you can refer
to the following resolution information.
Index Resolution
1
640x400
2 640x480
3
800x600
4 832x624
5
1024x768
6 1152x864
7 1152x870
8 1280x768
9 1280x768
10
1280x768
11 1280x960
12 1280x1024
13
1360x768
14 1400x1050
15 1400x1050
16
1400x1050
17 1400x900
18 1600x1200
19 1680x1050
20 1920x1080
21
1920x1080
22 1920x1200
23 1920x1200
24
480i-480p
25 576i-576p
01_MB62_[GB]_woypbpr_IDTV_TC_NICKEL17_1900UK_32906W_10078529_50216712.indd 31 01_MB62_[GB]_woypbpr_IDTV_TC_NICKEL17_1900UK_32906W_10078529_50216712.indd 31

Appendix D: Software Upgrade

• Your TV is capable of fi nding and updating new
software upgrades over broadcast channels.
• For broadcast channels search, the TV looks at the
available channels stored in your settings. So before
the software upgrade search, it is advised to auto
Frequency
search and update all available channels.
70Hz
1) Software upgrade search via user interface
60Hz-66Hz-72Hz
• It is possible to manually to check if there is a new
-75Hz
software upgrade for your TV set.
56Hz-60Hz-70Hz-
• Simply navigate on your main menu. Choose
72Hz -75Hz
Settings and select Other Settings menu. In Other
Settings menu navigate on to the Software Upgrade
75 Hz
item and press OK button to open Upgrade Options
60Hz-66Hz-70Hz-
menu.
72Hz -75Hz
• In Upgrade Options menu select Scan for upgrade
60Hz-70Hz-75Hz
and press OK button.
75Hz
• If a new upgrade is found, it starts to download
the upgrade. A progress bar indicates the remaining
60 HzA
download progress. When the download completes
60 HzB
successfully a message is displayed for reboot to
75Hz
activate new software. Press OK to continue with the
reboot operation.
60Hz-75Hz
2) 3.AM search and upgrade mode
60Hz-75Hz
• If Automatic scanning in Upgrade Options menu
60 Hz
is enabLCD, the TV wakes up at 03:00 and searches
60 HzA
the broadcast channels for new software upgrade. If
new software is found and downloaded successfully,
60 HzB
with the next power up the TV opens with new
75Hz
software version.
65Hz-75Hz
Note on reboot operation: Reboot is the last step
in software upgrade operation if download of new
60 Hz
software is fi nished successfully. During reboot TV
60 Hz
makes fi nal initializations. In the reboot sequence
60 HzA
panel power is closed and front LCD indicates the
activity with blinking. Around 5 minutes later TV
60 HzB
restarts with new software activated.
60HzA
• If your TV fails to restart in 10 minutes, unplug power
60Hz
for 10 minutes and re-plug again. TV should open with
new software safely. If you still can not get TV working,
60Hz
please kindly repeat unplug and plug sequence a few
50Hz
times more. If your set still can not operate, please call
the service personnel to fi x the problem for you.
Caution: While the LCD is blinking during reboot
do not unplug your TV's power. Doing this may
cause your TV not to re-start again and can only
be fi xed by service personnel.
English - 31 -
06.04.2012 19:48:15 06.04.2012 19:48:15