Lower Block Disassembly - Nokia N76-1 Service Manual

15.

LOWER BLOCK DISASSEMBLY

1. Needed tools: The SS-93, metal tweezers, the SS-45 camera
removal tool, a bit holder with a Torx Plus bit and a torque
driver. Keep your tools in good condition, Always replace them
if worn out.
3. Flip open the assembly. Shift the SS-93 under the menu key
of the KEYMAT as shown.
5. Carefully insert the flat bladed screwdriver and lever out the
clips of the HINGE COVER TOP.
Page 22 (51)
COMPANY CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
2. Check that no battery is inserted before starting
disassembling.
4. Now, lever out the KEYMAT carefully and discard it. Do not use
it again.
6. Lift up the HINGE COVER BOTTOM.
N76-1 RM-135 / N76-5 RM-149
Service Manual Level 1&2
ISSUE 3