Lower Block Disassembly Instructions - Nokia 7390 Service Manual

CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
12.

LOWER BLOCK DISASSEMBLY INSTRUCTIONS

1. Needed tools: a Torx driver, a torque driver with a bit holder,
a Torx plus size 6 bit, a DC-plug, a dental pick, the SS-93,
metal tweezers, the SS-111 connector opening tool, the SS-81
camera removal tool and the SRT-6.
3 Cover the sensitive surfaces with a protective film.
5. Remove the KEYMAT from the LOWER A-COVER.
Service Manual 7390 RM-140
Page 21 (47)
CONFIDENTIAL
2. Open and remove the BATTERY COVER. If a battery is inserted,
take it out.
4. Use the SS-93 to unlock the KEYMAT start on the shown side.
6. Unscrew the screws in the order shown.
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 2.0
MGR
31.Okt.2006