Connecting The Speakers - Insignia NS-A1000 User Manual

Stereo mode connections
Mono mode connections
Tri-mode operation
Tri-mode operation lets you connect a subwoofer to the bridged /
mono terminals, while (additional) main speakers are connected to
the stereo channels. Leave the crossover (subwoofer) switch on Full
position for this mode.
Refer to the chart below to select the correct value of capacitor or
inductor for the frequency you want.
The chart applies to all channel configurations, even though the
illustration below is for a 2 channel amplifier.
10
M O NO
R CH LCH
S P E A K E R O U T P U T
Frequency Inductor
80 Hz 7.5 mH
100 Hz 6.5 mH
120 Hz 5.5 mH
150 Hz 4 mH
www.insignia-products.com
Insignia NS-A1000 Car Stereo Amplifier
R EM
FU S E 12V
P O W E R I N P U T
Capacitor
470 uF
330 uF
330 uF
220 uF
GND