Table of Contents
Advertisement
Printing
Problem
I cannot print.
Cause & Remedy
≥Please verify the following.
1. Driver settings: If you change the driver settings in the
Panasonic KX-FLM600/650 dialog box, you may be able to print.
2. Preview window: If the image is not properly displayed in the
Preview window, your file may contain errors. Try printing a
different file. Also, there may be a problem with the application
you are using.
3. Bad connection between PC and printer: Verify the printer is
properly connected and plugged in.
4. Re-install: Uninstall PANA LINK, reboot your PC, then re-install
it.
5. Port setting: If the printer port is not set to FLM600, you cannot
print.
1) Click the Start button, point to Settings, then Printer.
2) Choose Properties from the printer's pop-up menu.
—The Properties dialog box appears.
5.
3) Click the Details tab, and check the Print to the following
port drop down list box. If a different port is selected,
re-select FLM600 (KX-FLM600 port).
5.
4) Click the OK button.
6. Bi-Directional Parallel Port. (ECP mode): If using ECP
(Extended Capability Port) mode, you may not be able to print.
Please change it into a standard port:
5.
1) Click the Start button, point to Settings, then Control Panel.
5.
2) Double-click System, and then open the Device Manager
tab.
5.
3) Double-click Ports [COM & LPT] from the Device Manager
tab.
5.
4) Double-click the ECP Printer Port.
5.
5) Click the Update Driver... button from the Driver tab.
5.
6) Change the ECP Printer Port into Printer Port (LPT1).
If the same error occurs repeatedly even after changing the printer
port, check the BIOS settings or update LPT.VXD. Please refer
your computer manufacturer for the latest LPT.VXD and the BIOS
settings. LPT.VXD version 4.00.955 is required. If you do not use
the correct version, we cannot guarantee that the driver will work
properly.
Reboot your PC, and try to test printing.
1) Click the Start button, point to Settings, then Printers.
2) Choose Properties from the printer's pop-up menu.
—The Properties dialog box appears.
3) Click the Print Test Page button from the General tab.
If the same error occurs, please see next.
Please verify the LPT.VXD version is 4.00.955:
1) Click the Start button, point to Settings, then Control Panel.
2) Double-click System, and then open the System Properties
dialog box.
3) Double-click Ports [COM & LPT] from the Device Manager tab.
4) Double-click Printer Port (LPT1).
5) Click the Driver tab. Verify whether the File version is 4.00.955.
Note: If it is an old version, you must uninstall PANA LINK first,
and then restart the PC, and re-install it again.
When you change settings manually, you must reboot your PC.
Troubleshooting
37
Advertisement
Table of Contents
