Download Print this page

Leg Assembly - decorflame QC111 Instruction Manual

Electric stove heater

Advertisement

NOTE: The stove may emit a slight harmless
odor when first turned on. This is caused by
activating the internal heater components for
the first time and should not occur again.
A 15 AMP circuit is required to operate this
heater. If the breaker trips when the heater is
used then you may need to move the heater
to another location or unplug other appliances
that are on the same circuit. If you require an
extension cord use one that is rated at 1875
watts.
IMPORTANT
Please note: When you open the carton care-
fully check the unit and make sure there is
no damage. If you have any problems with
the unit, with how the various functions work,
damaged or missing parts please call 1-800-
459-4409 (9am to 5 pm EST) immediately for
service.
NOTE: DO NOT RETURN UNIT
TO THE STORE bEFORE CALLINg
THE TOLL FREE NUMbER
Do not dispose of your cartons until you are
completely satisfied with your new stove
heater.
NOTE: Light bulbs may become loose during
shipping. If the flame effect is dim or does not
work, please check that light bulb or bulbs
are finger tight in socket. See instructions for
replacing bulb or bulbs. Please do not return
the sample to the store before checking light
bulbs.
S A F E T Y I N S T R U C T I O N S

LEg ASSEMbLY

before using your unit please install the legs
as shown in diagram below.
3

Advertisement

loading