Operation And Indication Sections Of Remote Controller - Pridiom AWS 091HX User Manual

USER'S MANUAL
Split Wall-Mounted Air Conditioner
This remote controller is the general one used for many types of air-conditioner in our company,we beg your forgiveness
that we would not introduce the button or indicator which is not applicable for units you purchased.The LAMP button is
applicable for special latest developed new models only instead of normal models.
Temperature indicator
Indicates the set temperature.
AUTO indicator
COOLING indicator
DRYING indicator
HEATING indicator
FANING indicator
SWING indicator
Indicates selected flap mode.
TIME indicator
Indicates timer time .
SET TEMPERATURE button
This button sets the room temperature.
MODE button
This button changes the operation mode:
AUTO,COOL,DRY,HEAT,FAN.
FAN SPEED button
This button set air rate.
TURBO button
This button changes to TURBO operation
(It does not work in AUTO,DRY,and FAN
mode.)
TIMER button
This button is used to set the switch-on or
switch-off and the timer time.
NOTE:
*
Above figure shows all indications for the purpose of explanation, but practically only the pertinent parts are indicated.When
air-conditioner is cooling-only model, the HEATis for FAN.
*
When TURBO operation is selected,room temperature is not controlled with operation being continually.If you feel the
room temperature is too cool or too heat,please cancel the TURBO operation.
Transmission procedure
h
6

*Operation and indication sections of remote controller*

ON
OFF
SWING
TIMER
HOLD
When each button on the remote controller is pressed with the remote
controller pointing toward the air conditioner unit, signal is sent.
When the signal is received correctly, the receiving sound is emitted
from the unit.
SLEEP indicator
Indicates during sleep operation.
TURBO indicator
Indicates during TURBO operation.
Key lock indicator
FAN SPEED indicator
Indicates the seted air rate.
ON/OFF
ON/OFF button
This button, when pressed starts operation
and stops when repressed.
SWING button
This button changes the flap mode:natural
flow ,swing or fixed wind.
AIR FLOW button(optional)
This button used for selection of the left/right
air flow direction,whenever pressed the in
flap will swing or fix(It just works on three-
dimensional air flow model.)
SLEEP button
This button changes to SLEEP operation.
HOLD button
Press this button to lock or unlock the
keyboard.