Baby Trend EuroSport Owner's Manual
  1. Manuals
  2. Brands
  3. Baby Trend Manuals
  4. Car Seat
  5. EuroSport
  6. Owner's manual

Baby Trend EuroSport Owner's Manual

3-in-1 car seat
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
WARNING!
Carefully read and understand all instructions and warnings in
this manual. Failure to properly use this car seat increases the
risk of serious injury or death in a sudden stop or crash.
KEEP INSTRUCTIONS FOR FUTURE USE.
Store this manual in the pocket provided
on the side of the Car Seat Base.
3
Stage
Backless Booster
2
Stage
Car Seat
High-back Booster
1
Stage
Car Seat
Toddler Car Seat
with Built-in
OWNER'S MANUAL
Harness
Para instrucciones en Español, conéctese a
1607 S. Campus Ave., Ontario, CA 91761
www.babytrend.com o llamar al: 1-800-328-7363.
Toll Free: 1-800-328-7363
www.babytrend.com
by Baby Trend
www.babytrend.com
EFB55FF0711

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EuroSport and is the answer not in the manual?

Questions and answers

Related Manuals for Baby Trend EuroSport

Summary of Contents for Baby Trend EuroSport

  • Page 1 High-back Booster Stage Car Seat Toddler Car Seat with Built-in OWNER’S MANUAL Harness Para instrucciones en Español, conéctese a 1607 S. Campus Ave., Ontario, CA 91761 www.babytrend.com o llamar al: 1-800-328-7363. Toll Free: 1-800-328-7363 www.babytrend.com by Baby Trend www.babytrend.com EFB55FF0711...

  • Page 2: Table Of Contents

    Table of Contents Table of Contents Installation WITH Top Tether..........28 1.0 General Warnings and Information..........3 7.3.1 Installation - LATCH WITH Top Tether.......29 WARNINGS................5 7.3.2 Installation - Lap/Shoulder Belt WITH Top Tether....34 3.0 Features and Benefits 7.3.3 Installation - Lap Belt Only WITH Top Tether......37 3.1 Toddler Car Seat................9...

  • Page 3: General Warnings And Information

    - Requires proper routing and adjusting fit of vehicle lap/shoulder belt. NEED HELP? Contact Baby Trend Customer Service at 1-800-328-7363 or one of the c. Always properly position the vehicle belts on your child and following resources: snugly adjust the vehicle belts around child.

  • Page 4: Warnings

    WARNINGS WARNINGS Failure to follow these instructions and Car Seat labels can result • Booster Use Mode: in child striking the vehicle’s interior during a sudden stop or - Use only with children that are 3 years old and weigh at crash.
  • Page 5 • DO NOT use accessories or parts other than those provided by Baby Trend, Inc. Use of accessories or parts from other manufacturers could alter the performance and safety of the Car Seat.

  • Page 6: Features And Benefits

    Features and Benefits Features and Benefits Toddler Car Seat Toddler Car Seat (WITH Built-in Harness System) (WITH Built-in Harness System) Head Support Head Support Back Support Harness Straps Metal Harness Top Tether Strap Harness Strap Retainers Toddler Shoulder Covers Belt Guide Tether Adjuster Harness Strap Harness Strap...

  • Page 7: High-Back Booster Car Seat

    Features and Benefits Features and Benefits High-back Booster Car Seat Backless Booster Car Seat (WITHOUT Harness System) (WITHOUT Harness System and Back Support) Head Support Shoulder Head Support Belt Guide Booster Shoulder Belt Guide Shoulder Belt Booster Shoulder Positioner Assembly Belt Guide (Stored in Owner’s Manual Storage Pocket)

  • Page 8: Preparing Car Seat For Use

    WITH Built-in Harness System Determine the Use Mode and Prepare the Car Seat for your Child • Select a vehicle seating location with a tether anchor, if available. Baby Trend requires using the tether for installation whenever possible. Toddler Car Seat WITH Built-in Harness System “22 - 50 lbs.”...

  • Page 9: Proper Use Check List

    Preparing Car Seat for Use Weight and Height Recommendations WARNING! Proper Use Check List Toddler Car Seat (WITH Harness) DEATH or SERIOUS INJURY can occur: Car seat is securely installed in vehicle. √ • FAILURE TO USE CHILD RESTRAINT IN A MANNER Green Tension Indicator on LATCH Adjuster is visible.

  • Page 10: Toddler Car Seat Use

    • Child’s height is between of age. 29 and 48 in. (74 and 122 cm) and Baby Trend and the American Academy of Pediatrics recommend • Top of child’s shoulders are using a High-back Booster Car Seat as long as possible before at or below top harness slots.

  • Page 11: Backless Booster Car Seat Use (Without Built-In Harness System)

    See “Vehicle Seat Belts” section for more information on vehicle Baby Trend and the American Academy of Pediatrics recommend seat belts. using a Backless Booster Car Seat until the child reaches a standing height of 57 in.
  • Page 12 (WITH Installation with Top Tether is Recommended. Harness) can be used with the LATCH a. Baby Trend requires using the Top Tether provided system to the maximum weight for with this car seat whenever possible. harness use - 50 lbs. * (23 kg).

  • Page 13: Seating Location

    Selecting a Vehicle Seating Location Toddler Car Seat (With Built-in Harness) Installation and Use Seating Locations to Avoid Proper Installation DO NOT use this Car Seat in the following seating locations. WARNING! • Never use this Car Seat in a vehicle seating location •...

  • Page 14: Belt Routing Options For Installation

    Note: Installation with Top Tether is recommended when a vehicle tether anchor is available. “FRONT ENTRY” Belt Routing Tether • Start by sliding the LATCH belt Baby Trend requires using the Top Tether provided with this Back or vehicle seat belt under the Support Car Seat whenever possible.

  • Page 15: Installation Without Top Tether "Rear Entry" Belt Routing

    Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use Installation WITH Top Tether Installation WITHOUT Top Tether “REAR ENTRY” Belt Routing The “FRONT ENTRY” belt routing, must be used when the Top Tether is used to Tether secure this Car Seat.

  • Page 16: Installation - Latch With Top Tether

    Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use 3. Route the LATCH lower anchor belt using Tether 7.3.1 Installation - LATCH WITH Top Tether the “FRONT ENTRY” belt routing as shown in Section 7.2.
  • Page 17 Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use 9. Place knee inside seat and while 13. Check for a secure installation by pressing down, pull on the free end of the grasping the car seat armrest and LATCH lower anchor belt to tighten the pushing side-to-side and front-to-back.
  • Page 18 Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use To remove car seat: 7.3.2 Installation - Lap/Shoulder Belt WITH Top Tether 1. Loosen Top Tether by pressing the button on Tether Adjuster and sliding belt through adjuster 2.
  • Page 19 Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use 6. If the vehicle seat back is adjustable, 12. While holding the lap belt tight, pull slack out adjust into the upright position or the Tether of shoulder belt and allow retractor to tighten position specified in the vehicle owner’s...

  • Page 20: Installation - Lap Belt Only With Top Tether

    Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use To secure car seat in vehicle: 1. Loosen Top Tether by pressing the button on 1. Assemble the Back Support (see “Assembly the Tether Adjuster and sliding belt through and Removal of Back Support”...
  • Page 21 Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use 7. Pull the vehicle Lap belt out and route 13. Check for a secure installation by grasping Tether through the car seat using the “FRONT the car seat armrest and pushing side-to-side ENTRY”...

  • Page 22: Installation Without Top Tether

    • The car seat must be held tightly by the LATCH System. Baby Trend requires using the Top Tether • Never attach more than one lower anchor connector or top provided with this Car Seat whenever possible.
  • Page 23 Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use 3. Adjust the harness strap height for your 9. Place knee inside seat and while pressing child – Harness straps MUST be at or down, pull on the free end of the LATCH above the child’s shoulders (see lower anchor belt to tighten the LATCH...

  • Page 24: Installation - Lap/Shoulder Belt Without Top Tether

    Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use To remove car seat: 7.4.2 Installation - Lap/Shoulder Belt WITHOUT Top Tether 1. Loosen LATCH lower anchor belt by putting knee in seat and while pressing down , lift up on LATCH Adjuster and slide belt through adjuster...
  • Page 25 Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use 10. While holding the lap belt tight, pull slack 4. Place the car seat on the vehicle seat in out of shoulder belt and allow retractor a seating location and centered between to tighten shoulder belt.

  • Page 26: Installation - Lap Belt Only Without Top Tether

    Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use 4. Place the car seat on the vehicle seat in 7.4.3 Installation - Lap Belt Only WITHOUT Top Tether a seating location and centered between the Lap belt anchorages (see “Selecting a Vehicle Seating Location”...

  • Page 27: Securing Your Child

    Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use 9. Check for a secure installation by grasping Securing your Child the car seat armrest and pushing side-to-side and front-to-back. The car seat should not move more than 1 inch in either direction.
  • Page 28 Baby Trend. securely. Contact Baby Trend at • Do not use Car Seat with harness straps loose or unbuckled. 1-800-328-7363 for assistance. Harness straps MUST be snug and positioned over shoulders and thighs of child.
  • Page 29 Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use 5. Close Harness Clip and position as 4. Snugly adjust harness. close to arm pit level as possible. Each Shoulder belt Adjuster has a green Tension Indicator that will be visible when the shoulder belt is tensioned properly.

  • Page 30: Booster Car Seat (Without Built-In Harness System)

    Toddler Car Seat (With Built-in Booster Car Seat Harness) Installation and Use (Without Built-in Harness) Installation and Use To remove your child: WARNING! 1. Unbuckle Harness Clip – press on the tabs in the top and bottom of the Harness DEATH or SERIOUS INJURY can occur: Clip and pull apart...

  • Page 31: High-Back Booster Car Seat

    Booster Car Seat Booster Car Seat (Without Built-in Harness) (Without Built-in Harness) Installation and Use Installation and Use WARNING! NOTE: LATCH or Top Tether may be used to secure the High-back Booster Car Seat in position. Securing the High-back Booster Car Seat in the vehicle can make it easier for a child to get in DEATH or SERIOUS INJURY can occur: and out of the High-back Booster Car Seat (see, Section 7.3.1).
  • Page 32 Booster Car Seat Booster Car Seat (Without Built-in Harness) (Without Built-in Harness) Installation and Use Installation and Use 4. If the vehicle seat back is adjustable, adjust 8. Adjust Head Support so that the vehicle into the upright position or the position shoulder belt passes over the shoulder specified in the vehicle owner’s manual midway between the neck and the end...

  • Page 33: Backless Booster Car Seat

    Booster Car Seat Booster Car Seat (Without Built-in Harness) (Without Built-in Harness) Installation and Use Installation and Use 10. Check fit of the vehicle seat belts on child: Backless Booster Car Seat (WITHOUT Built-in - Vehicle lap belt must be low on hips contacting the thighs. Harness) Installation and Use - Vehicle shoulder belt must contact the chest and be centered on the shoulder.
  • Page 34 Booster Car Seat Booster Car Seat (Without Built-in Harness) (Without Built-in Harness) Installation and Use Installation and Use 5. Pull the vehicle lap/shoulder belt across front To secure car seat and your child: of child and buckle vehicle seat belt. 1.

  • Page 35: Vehicle Seat Belts

    Booster Car Seat Vehicle Seat Belts (Without Built-in Harness) Installation and Use Check that the Vehicle Seat Belt is Safe to Use . Check fit of the vehicle seat belts The Car Seat is designed to be tightly installed at all times. The on child: vehicle seat belt must be capable of maintaining tight installation at all times.
  • Page 36 This style of belt must be locked to prevent movement of the Car Seat. Contact Baby Trend Customer Service Department to obtain a belt lock-off if needed.
  • Page 37 Vehicle Seat Belts Vehicle Seat Belts Combination Lap/Shoulder Belt With Retractor: Vehicle seat belt systems that are NOT safe for installation of Car Seat: DO NOT use a vehicle lap/shoulder DO NOT use the following types of vehicle seat belt systems with the belt system if the lap belt and shoulder Car Seat.
  • Page 38 Vehicle Seat Belts Vehicle Seat Belts Lap Belts Located Forward of Seat Crease: If you have any of the above vehicle seat belt systems, DO NOT use it to secure the Car Seat in the vehicle. Look in the vehicle for a location that has a more suitable vehicle seat belt system as described DO NOT use a vehicle seat belt that is in the “Vehicle seat belt Systems that are Adequate for installation of...

  • Page 39: Operation And Adjustments

    Operation and Adjustments Operation and Adjustments 10.0 10.0 10.1 Assembly and Removal of Back Support 10.2 Changing Harness Strap Adjustment WARNING! Before using your Car Seat in your vehicle, you must assemble the Back Support and prepare the Car Seat harness straps for your child. •...

  • Page 40: Changing Harness Strap Height

    Operation and Adjustments Operation and Adjustments 10.0 10.0 3. Check that the Harness Straps are snugly 10.3 Changing Harness Strap Height adjusted. The harness strap is properly tightened if you are not able to insert more WARNING! than one finger between the harness strap and the child’s shoulder or thigh and green tension indicators are visible on both DEATH or SERIOUS INJURY can occur: harness adjusters.
  • Page 41 Operation and Adjustments Operation and Adjustments 10.0 10.0 The harness can be adjusted to three different heights. The proper To re-attach Harness Strap: height of the harness straps is at or just above your child’s shoulders. If your child’s shoulders are between two levels, always use the higher of Re-attach the Harness Straps at the required the two.

  • Page 42: Harness Removal And Assembly

    Operation and Adjustments Operation and Adjustments 10.0 10.0 e. Remove lower end of harness strap 10.4 Harness Removal and Assembly and Crotch Belt. Harness Removal: - From bottom of Seat Base, pull the metal harness retainer away from the a. Buckle harness and chest clip to bottom of the Seat Base.
  • Page 43 Operation and Adjustments Operation and Adjustments 10.0 10.0 - Slide the metal harness retainer through Harness Assembly: the harness slot opening in the Seat Pad and Seat Base. WARNING! - Pull the metal harness retainer down through the harness slot on the shoulder away from the bottom of the Seat Base, •...

  • Page 44: Adjusting The Head Support

    Operation and Adjustments Operation and Adjustments 10.0 10.0 - Slide the Metal Harness Retainer 10.5 Adjusting the Head Support through the harness slot opening in the Back Support. The Head Support on this Car Seat is designed to provide maximum lateral head protection.

  • Page 45: Cup Holder Attachment

    Back Support and Harness. At the end of the useful life, please dispose of the buckle properly, consistent with Back Support and Seat Base. Storage Bar the guidelines for battery disposal. Should the alarm stop working, contact Baby Trend for assistance and replacement part.

  • Page 46: Additional Information

    Additional Information Cleaning and Maintenance 10.0 12.0 11.1 Certifications 12.0 Cleaning and Maintenance This Car Seat conforms to all Federal Motor Vehicle Safety The hard surfaces of the Car Seat (plastic components and metal Standards for use in motor vehicles and aircraft. See use modes parts) except the Smart Safety Buckle, may be cleaned by wiping below: with a solution of water with mild soap.
  • Page 47 • Remove back support (see “Assembly and Removal of Back Support” section). DO NOT launder the straps as they may become damaged or • Unhook top corners of pad from back support. weakened. Contact Baby Trend customer service or order • Slide back support pad down and off of back support. replacement straps. WARNING! To Remove Vehicle Shoulder Belt Positioner: •...

  • Page 48: Replacement Parts

    Send your name, address, email address if available, and the restraint’s model number and manufacturing date to: Baby Trend, Inc., 1607 S. Campus Avenue, Ontario, CA 91761 or call 1-800-328-7363 or register online at: http://www.babytrend.com/registration.html.

Table of Contents