A
I
SSEMBLY
NSTRUCTION
34
35
1
A
DJUSTMENT
Recommended: Apply thin coat of silicon lubricant to the top of the base rails
Assembly Hardware Required:
#34
Button Head Allen Bolt
#37
Hex Head Bolt
Assembly Description:
A) Securely fasten the Front Stabilizer Assembly (#1) to the Base Assembly (#2) using 2-Button Head Allen Bolts (#34) and
2– Flat Washers (#35).
B) Attach the Stabilizer Extension Assemblies (#4) to the rear frame extrusion of the Base Assembly using 4-Hex Head Bolts
(#37), 4-Flat Washers (#35), and 4-Acorn Nuts (#36) as shown above.
Assembly Notes: Use the Adjustable Levelers located on the bottom of the Stabilizer End Caps to level the equipment and prevent
the base unit from rocking on an uneven surface.
We also recommend using a silicon lubricant to coat the base rails. This will smooth the travel of the pedal movement, as well as,
eliminate any tracking or noise problems that may be caused by the roller material.
♦
Assembly Stage #1 complete
A
SSEMBLY
Attach Stabilizers to the Main Base
L
EVELER
Qty. 2
Qty. 4
S
#1
TAGE
2
#35
Flat Washer
#36
Acorn Nut
P
6
AGE
4
36
35
37
Qty. 6
Qty. 4