Power Saving Mode; Device Storage - Samsung Galaxy Note 3 User Manual

Power saving mode

This feature allows you both automatically set the phone to
use a power saving mode and configure additional power
saving options manually, to conserve battery power.
1. From the Home screen, press
Settings General tab
2. Touch and slide the Power saving mode
to the right to turn it on.
3. Tap these options to conserve power:
• CPU power saving: allows you to limit the maximum
performance of the CPU.
• Screen power saving: allows you to lower the screen power
level.
• Turn off haptic feedback: allows you to turn off vibration when
you tap or touch the screen.
4. Tap Learn about Power saving to learn about various
ways to conserve battery power.
212
Menu and then tap
Power saving mode.
ON
ON
slider

Device Storage

From this menu you can view the memory allocation for the
memory card as well as mount or unmount the SD card.
•
microSD memory cards include capacities of up to 4GB.
•
microSDHC™ memory card types can range from 4GB to up to
32GB.
•
microSDXC™ memory card types can include capacities greater
than 32GB.
View memory allocation on the memory card
From the Home screen, press
Settings General tab
The available memory displays under the Total space
and SD card headings.
Caution! DO NOT remove a microSD card while the device is
accessing or transferring files. Doing so will result in
loss or damage of data. Make sure your battery is
fully charged before using the microSD card. Your
data may become damaged or lost if the battery runs
out while you are using the microSD card.
Menu and then tap
Storage.