Advertisement
Quick Links
Specifications ES80 Eclipse Series Wireless Loudspeakers
Power
120 Watts power handling all speakers wired
Frequency Response
125~20000Hz
Efficiency
88 dB@1watt 1 metre
Impedance
8 Ohms nominal
Components
2 x 75mm (3 inch) paper cone drivers
1 x 25mm (1 inch) silk soft dome tweeter
Connections
Gold plated push terminals
Dimensions
Front and rear 1018H x 135W x 132D (mm) with base
Centre 110H x 360W x 145D (mm)
Weight
Front kg each, centre kg, rear kg each
Transmitter Voltage
240 Volts ~50 Hz +~- 10%
Transmission
2.4000 ~ 2.4835 GHz with Auto Seeking channels
Rear Speaker Amplifier 100 watts output with adjustable volume level
Colour
Black piano & PVC finish
Standby
Uses 1 watt of power in auto standby mode
ES 80.1 Powered Subwoofer Specifications Upgrade
Amplifier
Digital Switch Mode Amp. 300 Watts RMS
Voltage
240 Volt 50 Hz +~- 20%
Frequency Response
25~200 Hz
Driver
1 x 250mm (10 inch) paper cone driver
Passive Radiator
1 x 250mm (10 inch) paper cone radiator
Volume
Variable 0~10
Phase
Variable 0~180 degrees
Crossover Control
Variable 40~200 Hz
Main Power Switch
Switches Off, On
Standby
Switches Auto, On. Uses1 watt of power in standby
Fuse
Protection 2.5 amp
Input
RCA socket
Output
RCA socket
Dimensions
350H x 320W x375D (mm)
Weight
19kg
Colour
Black piano finish top
This system complies with AS/NZ4268: 2003
Accusound Australia Pty, Ltd
Unit 3, 17-19 Marshall Road,
Kirrawee NSW 2232
Ph (02) 9545-3905 Fax (02) 9545-3902
Email:
info@accusound.com.au
www.accusound.com.au
Eclipse Series Home
Please read these instructions carefully
2012
Quality Sound by Design
Theatre System
ES 80 Wireless
Instruction Manual
before turning on your speakers.
Contents
Carton 1
2 x Front speakers
1 x Centre speaker / Wireless Transmitter
2 x Wireless surround speakers
4 x Front & rear speaker bases
3 x AC Power leads for wireless transmitter and 2 surrounds
8 x 30mm screws for bases
Carton 2
1 x Powered Subwoofer
Advertisement
Related Manuals for Accusound ES 80 Wireless
Summary of Contents for Accusound ES 80 Wireless
- Page 1 240 Volts ~50 Hz +~- 10% Transmission 2.4000 ~ 2.4835 GHz with Auto Seeking channels Rear Speaker Amplifier 100 watts output with adjustable volume level ES 80 Wireless Colour Black piano & PVC finish Standby Uses 1 watt of power in auto standby mode Instruction Manual ES 80.1 Powered Subwoofer Specifications Upgrade...
- Page 2 The ES80 Wireless level of each speaker. The Accusound ES 80 Wireless surrounds are powered and your receiver will system has been designed to work on any digital receiver on the market. The system will give you clear not understand that the surround speakers are plugged into a wireless transmitter.
- Page 3 Volume Control Subwoofer Control Panel The volume control runs from 0-10. We suggest the volume be set to 5 - 7 and then controlled by the subwoofer setting on your receiver. When listening to movies or music make sure that the subwoofer does not go into distortion.
- Page 4 Speaker Terminals Speaker wire can be inserted into the hole in the shaft of the speaker’s and transmitter terminals. Simply strip away approximately 10mm of the wire jacket, push the connection terminal in and insert the wire through the hole in the shaft. Release the terminal and it holds the speaker wire in place. Make sure no stray wire strands touch the opposite terminal.