Samsung SVD-4120AW Instruction Manual page 2

Thank you for purchasing a SAMSUNG CCTV CAMERA.
Before operating the camera, confirm the camera model and
proper input power voltage. In order that you can understand
this manual thoroughly, we'll introduce our model description.
SVD-4120A Series (410,000 pixels)
• NTSC models
SVD-4120AN
SVD-4120AWN
Model Description
SVD-4120A X X
Signal system
Lens Type
• Lens Type
Blank 2.5X, f=3.8~9.5 Vari-Focal Lens
W 2.4X, f=2.5~6.0 Vari-Focal Lens
• Signal System
N NTSC Model
P PAL Model
• PAL models
SVD-4120AP
SVD-4120AWP
The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
INFORMATION -This equipment has been tested and found to comply with limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.