How To Connect The Machine To The Power Supply; How To Use The Foot Control; Sewing Lamp - Simplicity 621-401-008 Instruction Manual

HOW TO CONNECT THE MACHINE TO THE POWER SUPPLY

1. Fit the machine plug into the machine.
2. Plug the machine to the power supply.
Note: *Before plugging in the machine, ensure that the voltage and
number of cycles indicated, conforms to your electrical power
supply.

HOW TO USE THE FOOT CONTROL

Sewing speed can be varied by the foot control. The harder you press
on the controller, the faster the machine runs.
Note: *By releasing the controller, the machine stops running
automatically.
*Before using the machine, practice controlling the speed with
out threading.
HOW TO REPLACE THE SEWING LAMP
Before replacing a lamp, disconnect the machine from the power
supply.
To replace the sewing lamp, use the sewing lamp holder which you
may find in the accessory storage.
Push the holder from bottom until the lug over the sewing lamp, and
twist the holder together with sewing lamp in counterclockwise, until
the lamp is taken down.
To replace the new sewing lamp, twist the holder together with sewing
lamp in clockwise.
Retyped by Mastersewusa.com
9